1.52003
Chromolith® RP-18 endcapped (monolithic) HPLC Columns
L × I.D. 25 mm x 3 mm HPLC Column
Synonyme(s) :
Chromolith® Flash RP-18 endcapped 25-3 HPLC column
About This Item
Produits recommandés
product name
Colonne Chromolith® RP-18 Endcapped., L × I.D. 25 mm x 3 mm HPLC column
Matériaux
PEEK column
Niveau de qualité
Agence
suitable for USP L1
Gamme de produits
Chromolith®
Caractéristiques
endcapped
Conditionnement
1 ea of
Ampleur du marquage
18% Carbon loading
Paramètres
200 bar pressure
45 °C max. temp.
Technique(s)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
Colonne, L × D.I.
2.5 cm × 3 mm
Matrice
monolithic silica
Groupe de la matrice active
C18 bonding phase
Dimension de pores
13 nm mesoporosity
2 μm macroporosity
operating pH range
2-7.5
Technique de séparation
reversed phase
Température de stockage
no temp limit
Vous recherchez des produits similaires ? Visite Guide de comparaison des produits
Catégories apparentées
Description générale
Chromolith® Flash RP-18 endcapped 25-3 columns have macropores with 2 μm diameter, giving a column efficiency exceeding 80,000 plates/meter. The mesopores are 13 nm (130 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® Flash RP-18 endcapped 25-3 columns fall under the USP L1 Classification. The column efficiency is comparable to a 5 μm particle size fully porous particulate column. Chromolith® Flash RP-18 endcapped 25-3 columns are perfectly suitable for LC-MS applications.
The column dimension of 25 mm length and 3 mm I.D. is the best choice for rapid separations on any HPLC and UHPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® RP-18 endcapped 5-3 guard cartridges (3 pieces) [1.52005] with the Chromolith® Guard Cartridge Holder 5 mm x 3 mm [1.52004]
Holder and guard cartridges are also available as Guard cartridge set [1.52008]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Remarque sur l'analyse
Pressure: ≤ 10 bar
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 80000
Capacity factor (Anthracene): 3.3 - 4.3
Tailing (USP): 0.90 - 1.55 %
Informations légales
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Articles
Monolithic silica HPLC columns enable high-throughput analysis at low back pressure without loss of separation efficiency or peak capacity.
Chromolith® HPLC and UHPLC columns are made from monolithic silica with a bimodal pore structure using sol-gel technology.
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique