1.50248

Purospher^® STAR NH2 (5 µm) HPLC Columns

L × I.D. 250 mm x 4.6 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use

• Synonyme(s) : Purospher^® STAR NH2 (5 µm) LiChroCART^™ 250-4.6
• Code UNSPSC : 41115709
• Nomenclature NACRES : SB.52

Propriétés

• product name: Purospher^® STAR NH2 (5 µm), L × I.D. 250 mm x 4.6 mm LiChroCART^™ HPLC cartridge, manuCART^™ holder required for use
• Matériaux: stainless steel column
• Niveau de qualité: 100
• Agence: suitable for USP L8
• Gamme de produits: Purospher^®
• Caractéristiques: endcapped: no
• Conditionnement: 1 ea of
• Ampleur du marquage: 3.5% Carbon loading
• Paramètres: 250 bar pressure; 60 °C max. temp.
• Technique(s): HPLC: suitable; LC/MS: suitable; mass spectrometry (MS): suitable (Low - Medium)
• Colonne, L × D.I.: 25 cm × 4.6 mm
• Superficie: 330 m²/g
• Matrice: fully porous particle
• Groupe de la matrice active: NH₂ bonding phase
• Taille des particules: 5 μm
• Dimension de pores: 120 Å pore size
• operating pH range: 2-7.5
• Technique de séparation: hydrophilic interaction (HILIC); normal phase; reversed phase
• Température de stockage: no temp limit

Description

Description générale

Purospher^® STAR NH2, 5 µm HPLC columns are widely used for carbohydrate analysis, with a typical mobile phase consisting of acetonitrile and water. In terms of their polarity, these columns lie between bare silica and reversed-phase silica. Hence, Purospher^® STAR NH2 can also be used as an ion-exchanger. In acidic solutions, the NH2-groups are protonated (-NH3 +X-) and therefore display the characteristics of a weak anion exchanger. Medium polarity Purospher^® STAR NH2 columns possess hydrophilic as well as hydrophobic properties, thus can be used under both reversed-phase (HILIC) and normal-phase conditions. However, retention is weaker than on silica or RP-supports. Purospher^® STAR NH2 columns are based on ultra-pure fully porous silica particles (Type B). Purospher^® STAR NH2, 5 µm LiChroCART^™ 250-4.6 is a cartridge column which requires a manuCART^™ cartridge column holder part number 1.51486.0001.The recommended guard column is Purospher^® STAR NH2 (5 µm) LiChroCART^™ 4-4 part number 1.50267.0001. LiChroCART^™ cartridge columns mounted with a manuCART^™ cartridge column holder is hand-tight only and have therefore a maximum pressure stability of 250 bar. For higher pressure stability requirements Purospher^® STAR NH2, 5 µm Hibar^® RT 250-4.6 HPLC columns are available part number 1.51913.0001.The column dimension of 250 mm length x 4.6 mm I.D. is the optimal choice for the HPLC separation of complex.Learn more about Purospher^® STAR HPLC and UHPLC ColumnsLearn more about the Supelco HPLC Column portfolio and Method development:Brochure: HPLC and UHPLC Column Selection GuideBrochure: A Practical Guide to HPLC - Method Development Guide

Application

Intended to be used in the separation of alcohols,carboxylic acids, fat soluble vitamins, nucleotides, steroids, sugars, sugar alcohols, sweeteners, and water soluble vitamins.

Caractéristiques et avantages

• Ultra-pure silica (99.999%)
• Low silanol activity
• Reproducible results from run-to-run and batch-to-batch

Remarque sur l'analyse

Pressure: ≤ 60 bar
Theoretical Plates (N/m) (2-Nitrotoluene): ≥ 50000
Symmetry (2-Nitrotoluene): 0.8 - 1.4
Capacity factor (2-Nitrotoluene): ≤ 3.0

Informations légales

Hibar is a registered trademark of Merck KGaA, Darmstadt, Germany

LICHROCART is a trademark of Merck KGaA, Darmstadt, Germany

MANUCART is a trademark of Merck KGaA, Darmstadt, Germany

Purospher is a registered trademark of Merck KGaA, Darmstadt, Germany

Informations sur la sécurité

• Code de la classe de stockage: 11 - Combustible Solids