768618

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)

dry re-dispersible pellets

• Synonyme(s) : Orgacon^™ DRY, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)
• Numéro MDL: MFCD07371079
• Code UNSPSC : 12352103
• Nomenclature NACRES : NA.23

Propriétés

• Forme: dry re-dispersible pellets
• Niveau de qualité: 100
• Résistance: 200-450 Ω/sq
• Pf: >300 °C

Description

Description générale

A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer (CP) that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It is a low cost CP that is produced with physical appearance (for example dispersible pellets). The following are the properties that make PEDOT:PSS a viable polymer in organic electronics:

• good optical properties
• high conductivity
• functionalization of nanomaterials
• high thermal stability
• easy processing

Application

Orgacon DRY is specifically useful for water sensitive formulations containing UV curable monomer (suitable with small amount of water) and pre-polymer based formulations.

Orgacon DRY pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating - or ink - formulations targeted for different applications.

Allow retention of PEDOT/PSS key properties in polar organic solvents; such as Ethanol; Surface Resistance: 200~450 Ohm/square; Visual Light Transmission: ~85%

PEDOT:PSS can be used as a conductive material with a high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic printable electronics, textile electronics, electrochemical storage and supercapacitors, and lithium ion batteries.

Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

Propriétés physiques

• Active chemical PEDOT/PSS
• Visual appearance blue-grey pellets
• Water content max. 15 % under 50% RH; 22°C
• Shelf life 24 month in storage conditions

Notes préparatoires

When spin-coated using S300 EtOH (contains less than 3.5% wt. H20) as the solvent; the Visual Light Transmission (VLT) according to ASTM D 1003 (excludes substrate) is 85%; and the Surface Resistance is 450 Ohm/square.

Informations légales

Product of Agfa-Gevaert N.V.

Orgacon is a trademark of Agfa-Gevaert N.V.

Informations sur la sécurité

• Pictogrammes: GHS05
• Mention d'avertissement: Danger
• Mentions de danger: H318
• Conseils de prudence: P280 - P305 + P351 + P338
• Classification des risques: Eye Dam. 1
• Code de la classe de stockage: 11 - Combustible Solids
• Classe de danger pour l'eau (WGK): WGK 3
• Point d'éclair (°F): Not applicable
• Point d'éclair (°C): Not applicable