12873

Metal Packed GC Column (General Configuration)

phase 20% TCEP, matrix 80/100 Chromosorb P AW support, L × O.D. × I.D. 1.8 ft (0.55 m) × 1/16 in. × 0.75 mm

• UNSPSC Code: 41115710

Properties

• material: stainless steel column
• Agency: ASTM^® D4815
• manufacturer/tradename: Agilent
• parameter: 0-175 °C temperature (isothermal or programmed)
• technique(s): gas chromatography (GC): suitable
• L × O.D. × I.D.: 1.8 ft (0.55 m) × 1/16 in. × 0.75 mm
• matrix: 80/100 Chromosorb P AW support
• matrix active group: 20% TCEP phase
• column type: packed GC
• compatibility: for use with General Configuration

Description

General description

Packed column made up of stainless steel are basically used when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents.

An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column is of a general configuration, and can be carefully bent to fit most instruments.

Application

Aromatics/aliphatics

Legal Information

ASTM is a registered trademark of American Society for Testing and Materials

Safety Information

• Pictograms: GHS08
• Signal Word: Danger
• Hazard Statements: H372
• Precautionary Statements: P260 - P264 - P270 - P314 - P501
• Hazard Classifications: STOT RE 1 Inhalation
• Target Organs: Lungs
• Storage Class Code: 6.1D - Non-combustible acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
• WGK: WGK 2
• Flash Point(F): Not applicable
• Flash Point(C): Not applicable