Recommended Products
material
polyethersulfone
polypropylene
Quality Level
parameter
25 °C max. inlet temp.
80 psig max. inlet pressure
device size
10 in.
inlet connection diam.
1 1/2 in.
outlet connection diam.
9/16 in.
matrix
Viresolve® NFR
fitting
16 mm (5/8 in.) hose barb
1/4 in. hose barb (double O-ring Seal)
inlet sanitary flange
outlet hose barb
38 mm (1 1/2 in.) sanitary flange drain/vent
suitability
suitable for endotoxin
General description
A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
Analysis Note
The extractables level was equal to or less than 35 mg after a 10 minute 1.5 LPM/ft² flush and 24 hours in water at controlled room temperature.
Other Notes
EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Legal Information
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
Disclaimer
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service