818393

TSKgel^® GMHHR-H(S) HT (13 µm) HPLC Columns

L x I.D. 30 cm × 7.8 mm, polystyrene-divinylbenzene phase

• Synonym(s): TSKgel^® GPC Columns for Applications up to 140° C
• UNSPSC Code: 41115711

Properties

• product name: TSKgel^® GMH_HR-H(S) HT HPLC Column, phase polystyrene-divinylbenzene, L × I.D. 30 cm × 7.8 mm, 13 μm particle size
• material: stainless steel hardware
• Agency: suitable for USP L21
• product line: TSKgel^®
• manufacturer/tradename: Tosoh 18393
• parameter: 140 °C temperature; 2.5 mL/min flow rate; 20 bar max. pressure
• technique(s): HPLC: suitable
• L × I.D.: 30 cm × 7.8 mm
• matrix: polymer particle platform
• matrix active group: polystyrene-divinylbenzene phase
• particle size: 13 μm
• pore size: mixed
• separation technique: size exclusion (SEC)

Description

General description

TSKgel HT (High Temperature) columns are for the analysis of organic-soluble polymers at temperatures up to 140°C and are shipped in o-dichlorobenzene (ODCB), which can be exchanged for 1-chloronaphthalene and trichlorobenzene. The TSKgel mixed bed columns are packed with particles of different pore sizes that are blended to provide an extended linear calibration curve. Mixed bed columns are used when a broad range of polymer molar masses is expected in the sample. Shearing, which can be observed when analyzing ultra-high molar mass polymers on columns packed with 5 micron or smaller particles, can be overcome by using the TSKgel GMHhr-H(S) HT column, which is packed with 13 micron particles. The (S) is a reference to this shearing effect.

The issue of shearing that occurs with the analysis of ultra-high molar mass polymers is overcome by the TSKgel GMHhr-H(S) HT column. The (S) is a reference to this shearing effect.

Physical form

ODCB can be exchanged by 1-chloronaphthalene and trichlorobenzene.

Recommended products

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Legal Information

TSKgel is a registered trademark of Tosoh Corporation