WHA67029500

Whatman^® in-line HEPA filtration units

Hepa-Cap 150, inlet for 3/8 inch FNPT, outlet for 3/8 inch FNPT

• Synonym(s): Z743623, in line Hepa filters, in line filters
• UNSPSC Code: 41104922
• NACRES: NB.24

Properties

• material: glass fiber-reinforced polypropylene membrane; polypropylene housing
• sterility: non-sterile
• packaging: pkg of 1 ea
• manufacturer/tradename: Whatman 6702-9500; Whatman Article No. 28420116 (US reference)
• diam.: 50 mm
• pore size: 0.3 μm
• fitting: inlet for 3/8 inch FNPT; outlet for 3/8 inch FNPT

Description

General description

Whatman HEPA-CAP Vent Filters are high-retention and high flow-rate glass fiber filters that are commonly used in both research and industry to remove particulates from air and gases.

Features and Benefits

• Used across scientific, research, and industrial environments in a variety of air and gas filtration applications that require high particle retention and the ability to capture dirt and debris at high flow rates.
• In-line filter capsules are particularly suitable for sterile venting of fermenters or reaction vessels to prevent airborne particles from entering or exiting the vessel.
• Well suited for tissue culture, in-line filtration, and prefiltration for suction or to serve gas in-line filters.
• Strengthened by dual lamination with a tough polyester monofilament.
• Filters are pleated to maximize surface area for high particle retention and high flow rate
• Typical retention efficiency: 99.97% of all particles ≥ 0.3 µm in air
• Depth filter design: allows for high loading capacity and bi-directional flow
• Repeatedly autoclavable: at 121°C for 20 minutes (132°C max)

Other Notes

Field of Use : For internal research use only. Products are not intended for diagnostic use or resale.

Legal Information

Whatman is a registered trademark of Cytiva