1.50256
Purospher® STAR RP-18 endcapped (5 µm) HPLC Columns
L × I.D. 250 mm x 2 mm LiChroCART® HPLC cartridge, manuCART™ holder required for use
Sinónimos:
Purospher® STAR RP-18 endcapped (5 µm) LiChroCART® 250-2
About This Item
Productos recomendados
product name
Purospher® STAR RP-18 desactivada (5 µm), L × I.D. 250 mm x 2 mm LiChroCART® HPLC cartridge, manuCART™ holder required for use
material
stainless steel column
Quality Level
agency
suitable for USP L1
product line
Purospher®
feature
endcapped
packaging
1 ea of
extent of labeling
17% Carbon loading
parameter
250 bar pressure
65 °C max. temp.
technique(s)
HPLC: suitable
LC/MS: suitable
mass spectrometry (MS): suitable (High)
column L × I.D.
25 cm × 2 mm
surface area
330 m2/g
matrix
fully porous particle
matrix active group
C18 bonding phase
particle size
5 μm
pore size
120 Å pore size
operating pH range
1.5-10.5
separation technique
reversed phase
storage temp.
no temp limit
¿Está buscando productos similares? Visita Guía de comparación de productos
General description
These columns offer an outstanding stability from pH 1.5 to 10.5 over a wide temperature range, and suitability for up to 100% aqueous mobile phases. Plus, they demonstrate best all-round retention characteristics, as proven by the Tanaka test.
Purospher® STAR RP-18 endcapped, 5 µm LiChroCART® 250-2 is a cartridge column which requires a manuCART™ cartridge column holder part number 1.51486.0001. The manuCART™ can be used to hold one cartridge column with or without direct integration of a guard column.
LiChroCART® cartridge columns mounted with a manuCART™ cartridge column holder are hand-tight only and have therefore a maximum pressure stability of 250 bar.
For higher pressure stability requirements Purospher® STAR RP-18 endcapped, 5 µm Hibar® RT 250-2 HPLC columns are available part number 1.50598.0001.
For use under UHPLC conditions (where a pressure stability up to 1000 bar is required) it is recommended to use a Purospher® STAR RP-18 endcapped, 3 µm Hibar® HR 250-2.1 UHPLC Column part number 1.50655.0001
The column dimension of 250 mm length x 2 mm I.D. is the optimal choice for HPLC separation of complex samples at lower flow rate, allowing significant solvent savings and improved sensitivity
Learn more about Purospher® STAR HPLC and UHPLC Columns
Learn more about the Supelco HPLC Column portfolio and Method development:
Brochure: HPLC and UHPLC Column Selection Guide
Brochure: A Practical Guide to HPLC - Method Development Guide
Application
Features and Benefits
- Ultra-pure silica (99.999%) for excellent peak symmetry
- High separation efficiency
- Reproducible results from run-to-run and batch-to-batch
- Best all-round performance according to Tanaka
- Outstanding pH stability from pH 1.5 to 10.5
- No phase collapse when using highly aqueous mobile phases
- Good suitability for LC-MS applications
Analysis Note
Theoretical Plates (N/m) (hexylbenzene): ≥ 70000
Symmetry (hexylbenzene): 0.8 - 1.4
Capacity factor (hexylbenzene): ≥ 8.0
Legal Information
Storage Class
11 - Combustible Solids
Certificados de análisis (COA)
Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»
¿Ya tiene este producto?
Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.
Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.
Póngase en contacto con el Servicio técnico