Saltar al contenido
Merck

900563

Sigma-Aldrich

Poly(3-hexylthiophene-2,5-diyl)

regioregular, average Mw 20,000-45,000

Sinónimos:

P3HT

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
(C10H14S)n
Número de CAS:
UNSPSC Code:
12162002
NACRES:
NA.23

description

Metal purity: Mg: ≤100 ppm
Ni: ≤100 ppm

Regioregularity: ≥90%

Quality Level

form

solid

mol wt

average Mw 20,000-45,000

InChI

1S/C12H20S/c1-4-5-6-7-8-12-9-10(2)13-11(12)3/h9H,4-8H2,1-3H3

InChI key

DUFPJSOXRHVDOV-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

Poly(3-hexylthiophene-2,5-diyl) (P3HT) is a polythiophene-based low bandgap semiconducting polymer. It is widely used as anelectron donor material in organic solar cells, OLEDs, and OFETs due to itschemical and thermal stability, controlled synthetic method, goodsemiconducting properties, simple structure, and widecommercial availability. The degree of regioregularity of P3HT has a stronginfluence on its ability to form highly ordered domains.

Application

Poly(3-hexylthiophene-2,5-diyl) can be used as a:

  • Active semiconductor to prepare organic field emission transistors. In regioregular P3HT the microcrystalline domains are well constructed by phase-segregated layers of insulating alkali side chains and pi-pi interchain stacking. This leads to high charge mobility and enhances the performance of OFETs.
  • Precursor to synthesize P3HT-PCBM( [6,6]-phenyl C61-butyric acid methyl ester) blend thin film. The highcrystallinity of P3HT thin film increases the efficiency of organicphotovoltaic cells.

Storage Class

11 - Combustible Solids

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Morongwa E Ramoroka et al.
Polymers, 13(1) (2020-12-31)
This report focuses on the synthesis of novel 2,3,4,5-tetrathienylthiophene-co-poly(3-hexylthiophene-2,5-diyl) (TTT-co-P3HT) as a donor material for organic solar cells (OSCs). The properties of the synthesized TTT-co-P3HT were compared with those of poly(3-hexylthiophene-2,5-diyl (P3HT). The structure of TTT-co-P3HT was studied using nuclear

Artículos

Professor Shinar (Iowa State University, USA) summarizes the developments of a variety of sensor configurations based on organic and hybrid electronics, as low-cost, disposable, non-invasive, wearable bioelectronics for healthcare.

Intrinsically stretchable active layers for organic field-effect transistors (OFET) are discussed. Polymer structural modification & post-polymerization modifications are 2 methods to achieve this.

Next generation solar cells have the potential to achieve conversion efficiencies beyond the Shockley-Queisser (S-Q) limit while also significantly lowering production costs.

Dr. Perini and Professor Correa-Baena discuss the latest research and effort to obtain higher performance and stability of perovskite materials.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico