Saltar al contenido
Merck
Todas las fotos(1)

Key Documents

View All Documentation

545007

Sigma-Aldrich

Tantalum

Sinónimos:

Ta

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula empírica (notación de Hill):
Ta
Número de CAS:
7440-25-7
Peso molecular:
180.95
MDL number:
MFCD00011252
UNSPSC Code:
12141741
PubChem Substance ID:
24878801
NACRES:
NA.23

vapor pressure

<0.01 mmHg ( 537.2 °C)

Quality Level

100

autoignition temp.

572 °F

resistivity

13.5 μΩ-cm, 20°C

bp

5425 °C (lit.)

mp

2996 °C (lit.)

density

16.69 g/cm3 (lit.)

SMILES string

[Ta]

InChI

1S/Ta

InChI key

GUVRBAGPIYLISA-UHFFFAOYSA-N

Application

Tantalum powder, a semiconducting material, is used as a photocatalyst and shows high efficiency in the solar splitting of water. Its biocompatibility makes it useful in the development of medical devices and implants.

pictograms

Flame
GHS02

signalword

Danger

hcodes

H228

Hazard Classifications

Flam. Sol. 1

Storage Class

4.1B - Flammable solid hazardous materials

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCK3662
MKCF6116
MKBW4038V
MKBL4374V
MKBG3344V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Los clientes también vieron

Slide 1 of 3

1 of 3

Vanadium powder, &#8722;325&#160;mesh, 99.5% trace metals basis

Sigma-Aldrich

262935

Vanadium

Tantalum(V) chloride anhydrous, powder, 99.999% trace metals basis

Sigma-Aldrich

510688

Tantalum(V) chloride

Tantalum foil, thickness 0.025&#160;mm, &#8805;99.9% trace metals basis

Sigma-Aldrich

262919

Tantalum

Tantalum-based semiconductors for solar water splitting
Zhang P, et al.
Chemical Society Reviews, 43(13), 4395-4422 (2014)
Hany A El-Sayed et al.
Nanoscale, 5(4), 1494-1498 (2013-01-23)
Ta oxide nanotubes (NTs) were formed by the anodization of Ta at 15 V in a solution of concentrated sulfuric acid containing 0.8-1.0 M hydrofluoric acid. To study the initial stages of NT formation, FESEM images of samples anodized for
Orbital ultrasound in the selective screening of a dural-cavernous sinus fistula.
Hamid Shokoohi et al.
European journal of emergency medicine : official journal of the European Society for Emergency Medicine, 20(2), 137-139 (2013-02-26)
S Nag et al.
Journal of the mechanical behavior of biomedical materials, 16, 21-28 (2012-11-10)
Microstructure and mechanical properties of laser deposited complex quaternary Ti-34Nb-7Zr-7Ta (all wt%), an orthopedic load-bearing implant alloy, has been investigated in detail in both as-deposited as well as heat-treated (β-solutionized and quenched) conditions. The difference in stress-strain behavior of this
Thomas Larzon et al.
Vascular, 21(2), 87-91 (2013-03-20)
Control of back bleeding from the hypogastric artery into the aneurysm after endovascular aneurysm repair (EVAR) of a ruptured aorto-iliac aneurysm may be necessary in order to avoid a type II endoleak. It is an emergency situation and selective catheterization
Ver todos los artículos relacionados

Artículos

Self-Propagating Reactions Induced by Mechanical Alloying

An article concerning self-propagating reactions induced by mechanical alloying, presented by Sigma-Aldrich.com.

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico