Saltar al contenido
Merck

333492

Sigma-Aldrich

Titanium(IV) sulfide

powder, -200 mesh, 99.9%

Sinónimos:

Titanium disulfide

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Fórmula lineal:
TiS2
Número de CAS:
Peso molecular:
112.00
EC Number:
MDL number:
UNSPSC Code:
12161600
PubChem Substance ID:
NACRES:
NA.22

Quality Level

assay

99.9%

form

powder

reaction suitability

core: titanium
reagent type: catalyst

particle size

-200 mesh

SMILES string

S=[Ti]=S

InChI

1S/2S.Ti

InChI key

CFJRPNFOLVDFMJ-UHFFFAOYSA-N

¿Está buscando productos similares? Visita Guía de comparación de productos

General description

Titanium(IV)sulfide (TiS2) is a commercially available transition metal sulfide catalyst. TiS2 is classified as a transition metal dichalcogenide and used in rechargeable batteries as a cathode material.

Application

Titanium(IV)sulfide is used to analyze oxidation in various environmental conditions using advanced electron microscopy.

pictograms

FlameExclamation mark

signalword

Warning

Hazard Classifications

Eye Irrit. 2 - Self-heat. 2 - Skin Irrit. 2 - STOT SE 3

target_organs

Respiratory system

Storage Class

4.2 - Pyrophoric and self-heating hazardous materials

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

dust mask type N95 (US), Eyeshields, Gloves


Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Andreea-Madalina Craiu
Oftalmologia (Bucharest, Romania : 1990), 53(2), 97-103 (2009-08-25)
The permanent colouring of disfigured corneal scars is known for almost 200 years. Because of improvement in surgical reconstructive techniques, corneal tattoing is used today only with a restricted group on carefully chosen patients, and merely for esthetique reasons.
[Experimental evaluation of the effect of aerosols of titanium mono- and disulfide on the body].
I T Brakhnova et al.
Gigiena truda i professional'nye zabolevaniia, (8)(8), 50-52 (1989-01-01)
Sujay Prabakar et al.
Chemical communications (Cambridge, England), 47(1), 439-441 (2010-09-21)
The synthesis of inorganic fullerene (IF) nanoparticles and IF hollow spheres of titanium disulfide by a simple colloidal route is reported. The injection temperature of the titanium precursor into the solvent mixture was found to be important in controlling the
Ying Wen Linda Lim et al.
Nanoscale, 2(12), 2751-2757 (2010-10-13)
Titania (TiO2) and sodium titanate nanostructures with controllable phases and morphologies were synthesized by a hydrothermal method with titanium disulfide (TiS2) as the starting material. Sodium titanate nanobelts could be synthesized under a relatively low alkaline concentration (1 mol L(-1)
An in situ and ex situ TEM study into the oxidation of titanium (IV) sulphide
Long E, et al.
NPJ 2D materials and applications, 1(1), 1-9 (2017)

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico