Saltar al contenido
Merck
Todas las fotos(1)

Key Documents

View All Documentation

268496

Sigma-Aldrich

Titanium

powder, −100 mesh, 99.7% trace metals basis

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización
Todas las fotos(1)

About This Item

Fórmula empírica (notación de Hill):
Ti
Número de CAS:
7440-32-6
Peso molecular:
47.87
EC Number:
231-142-3
MDL number:
MFCD00011264
UNSPSC Code:
12141746
PubChem Substance ID:
24856277
NACRES:
NA.23

Quality Level

100

assay

99.7% trace metals basis

form

powder

autoignition temp.

860 °F

resistivity

42.0 μΩ-cm, 20°C

particle size

−100 mesh

bp

3287 °C (lit.)

mp

1660 °C (lit.)

density

4.5 g/mL at 25 °C (lit.)

SMILES string

[Ti]

InChI

1S/Ti

InChI key

RTAQQCXQSZGOHL-UHFFFAOYSA-N

Categorías relacionadas

General description

Titanium (Ti) powder with a particle size of 100 mesh is a part of the powder metallurgy based materials. It can be produced by a variety of methods which include plasma rotating electrode process (PREP), gas atomization (GA), plasma atomization (PA) and induction plasma spheroidization (IPS).

Application

Ti powder can be used for applications such as automotive exhaust systems, cookware, tubing, medical implants, building, and construction.

pictograms

Flame
GHS02

signalword

Danger

hcodes

H228

Hazard Classifications

Flam. Sol. 1

Storage Class

4.2 - Pyrophoric and self-heating hazardous materials

wgk_germany

nwg

flash_point_f

Not applicable

flash_point_c

Not applicable

ppe

Eyeshields, Gloves, type N95 (US)

Elija entre una de las versiones más recientes:

Certificados de análisis (COA)

Lot/Batch Number
MKCK5755
MKCD2217
MKBV6891V
MKBP7510V
MKBG4255V

¿No ve la versión correcta?

Si necesita una versión concreta, puede buscar un certificado específico por el número de lote.

Busque por un COA

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Conventional titanium powder production, 1-19 (2015)
Titanium Powder Metallurgy, 21-32 (2015)
Titanium Powder Metallurgy, 1-19 (2015)
A Kurbad et al.
International journal of computerized dentistry, 16(2), 125-141 (2013-08-13)
This article presents two novel options for lithium-disilicate restorations supported by single-tooth implants. By using a Ti-Base connector, hybrid abutments and hybrid abutment crowns can be fabricated for different implant systems. The latter option in particular is an interesting new
Jinho Shin et al.
Journal of nanoscience and nanotechnology, 13(8), 5807-5810 (2013-07-26)
In this study, hydroxyapatite (HA) was coated on anodized titanium (Ti) surfaces through radio frequency magnetron sputtering in order to improve biological response of the titanium surface. All the samples were blasted with resorbable blasting media (RBM). RBM-blasted Ti surface
Ver todos los artículos relacionados

Artículos

Self-Propagating Reactions Induced by Mechanical Alloying

An article concerning self-propagating reactions induced by mechanical alloying, presented by Sigma-Aldrich.com.

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico