11 (20 °C, 20 g/L)
217 °C/760 mmHg (lit.)
0.946 g/mL at 25 °C (lit.)
Diagnostic Assay Manufacturing
Looking for similar products? Visit Product Comparison Guide
Acute Tox. 4 Oral - Eye Dam. 1 - Skin Corr. 1B - Skin Sens. 1
8A - Combustible, corrosive hazardous materials
199.4 °F - closed cup
93 °C - closed cup
If available for a given product, the recommended re-test date or the expiration date can be found on the Certificate of Analysis.
The lot specific COA document can be found by entering the lot number above under the "Documents" section.
There are several ways to find pricing and availability for our products. Once you log onto our website, you will find the price and availability displayed on the product detail page. You can contact any of our Customer Sales and Service offices to receive a quote. USA customers: 1-800-325-3010 or view local office numbers.
This product has been cited as being a better tissue adhesive than poly-L-lysine. Maddox PH, Jenkins D., 3-Aminopropyltriethoxysilane (APES): a new advance in section adhesion. J Clin Pathol., 40(10):1256-7 (1987).
To coat controlled-pore glass beads for affinity chromatography, the following method is recommended:1. Treat 1 g of clean beads with 20 mL of a 10% aqueous A3648 (pH 3 to 4) at 75 °C for 2 hours.2. Filter the beads to remove the solution and dry overnight in a 115 °C oven. See: J. Dairy Sci., 73, 2720-2730 (1990).
Yes. Silane Prep slides, Product No. S4651, are produced using A3648. These slides have an expiration period of 24 months.
Transportation information can be found in Section 14 of the product's (M)SDS.To access the shipping information for this material, use the link on the product detail page for the product.
The (3-Aminopropyl)triethoxysilane, which is a neat liquid, is 4.3 M. This is based on a density of 0.946 g/mL and a molecular weight of 221.37.
For Product A3648, (3-Aminopropyl)triethoxysilane, the siliconized coating can be removed by an overnight treatment with 10-20% (w/v) aqueous or alcoholic potassium hydroxide or sodium hydroxide solutions. It may also be possible to remove the coating by physical abrasion, i.e., scrubbing or vigorously brushing the glass surface. Autoclaving will not destroy the coating.
Ask a Scientist here.