MilliporeSigma
All Photos(1)

1.04907

Supelco

Potassium bromide

for IR spectroscopy Uvasol®

Synonym(s):
Potassium bromide, Hydrobromic Acid Potassium Salt
Empirical Formula (Hill Notation):
BrK
CAS Number:
Molecular Weight:
119.00
MDL number:
EC Index Number:
231-830-3

vapor pressure

1.3 hPa ( 795 °C)

Quality Level

form

solid

potency

>2000 mg/kg LD50, oral (Rat)

pH

5.5-8.5 (20 °C, 50 g/L in H2O)

bp

1435 °C/1013 hPa

mp

730 °C

solubility

650 g/L

density

2.75 g/cm3 at 20 °C

bulk density

900‑1000 kg/m3

storage temp.

2-30°C

InChI

1S/BrH.K/h1H;/q;+1/p-1

InChI key

IOLCXVTUBQKXJR-UHFFFAOYSA-M

Related Categories

Compare Similar Items

View Full Comparison

1 of 4

This Item
1.049041.93672243418
Potassium bromide for IR spectroscopy Uvasol®

Supelco

1.04907

Potassium bromide

Potassium bromide 99.999 Suprapur®

Supelco

1.04904

Potassium bromide

Supelco

Supelco

1.93672

Potassium bromide

Potassium bromide ACS reagent, ≥99.0%

Sigma-Aldrich

243418

Potassium bromide

vapor pressure

1.3 hPa ( 795 °C)

vapor pressure

1.3 hPa ( 795 °C)

vapor pressure

-

vapor pressure

<0.01 mmHg ( 20 °C), 1 mmHg ( 795 °C)

form

solid

form

solid

form

-

form

crystalline powder, crystalline solid, crystals or chunks

pH

5.5-8.5 (20 °C, 50 g/L in H2O)

pH

5.5-8.5 (20 °C, 50 g/L in H2O)

pH

-

pH

5.0-8.8 (25 °C, 5%)

bp

1435 °C/1013 hPa

bp

1435 °C/1013 hPa

bp

-

bp

-

mp

730 °C

mp

730 °C

mp

-

mp

734 °C (lit.)

solubility

650 g/L

solubility

650 g/L

solubility

-

solubility

-

General description

Potassium bromide is transparent from the near UV to long wave IR wavelengths. In IR-spectroscopy, solid samples which are difficult to melt or dissolve in any suitable IR-transmitting solvent, are analyzed by grinding with Potassium bromide powder, and pressing into a disc. This procedure has a high quality demand of the used potassium bromide. Potassium bromide Uvasol is adjusted to a mean particle size of 150 μm. This is sufficient for the preparation of perfectly good pellets without the need for further pre-treatment and the associated risk of contamination. It also retains its powdery form over a period of years if stored in an air-tight condition. Its physical suitability for pelletising is checked by a special application test and its chemical purity established by full spectrum FT-IR analysis.

Linkage

Replaces: PX1378

Analysis Note

Application test: passes test
Absorbance(2g pressed disk, 0.5 cm layer thickness)(Water; 3775-3050/1760-1520 cm⁻¹): ≤ 0.15
Absorbance(2g pressed disk, 0.5 cm layer thickness)(CH-compounds; 3050-2750 cm⁻¹): ≤ 0.004
Absorbance(2g pressed disk, 0.5 cm layer thickness)(other ; 4000-400 cm⁻¹): ≤ 0.020
Particle Size (d10): ≤ 100 µm
Particle Size (d50): ≤ 200 µm
Particle Size (d90): ≤ 500 µm

Legal Information

UVASOL is a registered trademark of Merck KGaA, Darmstadt, Germany

Pictograms

Exclamation mark

Signal Word

Warning

Hazard Statements

Hazard Classifications

Eye Irrit. 2

Storage Class Code

13 - Non Combustible Solids

WGK

WGK 1

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Certificate of Analysis

Please enter the Product Number and Lot Number.

Certificate of Quality

Please enter the Product Number and Lot Number.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service