All Photos(1)



FlexSolid® 3D printing filament

clear, diam. 1.75 mm


1.75 mm


1 lbspool



Looking for similar products? Visit Product Comparison Guide


FlexSolid® is extremely flexible without tearing easily unlike other flexible filaments. It is ideal on anything that requires engineering tolerance without compromising on long term durability. Compatible with non-Bowden printers. Note: We do not recommend FlexSolid® for intricately detailed prints as stringiness may occur.

3D Printed wearables and fashion are now possible with this fantastic elastic. Compatible with all major consumer FDM/FFF printers. 

  • Opaque white finish
  • Can print significant 60° overhangs without failing
  • Flexible and resistant to tear
  • No warping
  • Heated plate not necessary
  • Fast print speed

Preparation Note

Printing setup

Makerbot Replicator 2X
1. Print temperature: 230°C
2. Feed rate: 40mm/s

Type A Machines Series 1 2014
1. Print temperature: 240°C
2. Print speed: 50mm/s

Up! Plus 2
1. Extrusion temperature: "ABS" setting
2. Quality: "Fine" setting

Flashforge Dreamer–Slic3r
Layer Height: 0.2mm 
Number of shells: 3 
Print Temp: 240 °C
Bed Temp: 80 °C
Print Speed: 50mm/s 
Travel Speed: 80mm/s 
Fill Amount: 18% Note: Use rigid feed tube 

AirWolf–Using the Robo3D Matter control, using matter slice, 3 perimeters, .2mm layer, print fan on, 220-230 extrude, 55 bed. Robo′s wade extruder use 50% PLA speeds. Print Speeds approximately 15mm/s ** Note: **The robo extruder has a large gap between the hotbed bolt and the hot end throat. The filament bind up on retractions and fast printing

Legal Information

FlexSolid is a registered trademark of MadeSolid, Inc.

Certificate of Analysis

Enter Lot Number to search for Certificate of Analysis (COA).

Certificate of Origin

Enter Lot Number to search for Certificate of Origin (COO).

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service