All Photos(2)



Carbon nanotube, single-walled, poly(ethylene glycol) functionalized

greener alternative

>80% carbon basis, D × L 4-5 nm × 0.5-0.6 μm , bundle dimensions

Carbon nanotube, single-walled, PEG functionalized, SWNT, PEG functionalized
MDL number:


>80% carbon basis



mol wt

Mw ~600 g/mol (PEG)

greener alternative product characteristics

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

D × L

4-5 nm × 0.5-0.6 μm , bundle dimensions


4-5% trace metals


H2O: 5 mg/mL

functional group


greener alternative category

General description

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Carbon nanotubes are ideal materials due to its impressive material properties such as mechanical strength, thermal and electrical conductivity. Click herefor more information.

Preparation Note

Electric Arc Discharge Method
Procedure for dispersion of this PEG-functionalized SWNTs product in water:
Typically after this procedure, the material is completely dispersed according to visual observation.
Sonicate 50 mg of material in 5 mL water for 30 min. (A bath sonicator with a sonic power between 45 W and 270 W works fine. A sonic power of 270 W is preferable for faster dispersion).
Add 45 mL of water and sonicate for additional 60 min (or until the material appears well-dispersed).
Dilute the dispersion to the desired concentration and sonicate if necessary. If aggregates are still visible continue to sonicate until satisfactory dispersion is obtained. Note: If unable to achieve a satisfactory dispersion, reduce the initial amount of 50 mg of material in 5 mL of water.
This procedure is to be used as a basis and additional procedures can be researched. Results may vary if this is the first time working with this material. Solubility of this PEG-functionalized SWNTs product can reach 5.0 mg/mL in water.

Analysis Note

Carbonaceous content


Exclamation mark

Signal Word


Hazard Statements

Hazard Classifications

Eye Irrit. 2 - STOT SE 3

Target Organs

Respiratory system

Storage Class Code

11 - Combustible Solids



Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).


Product Number
Pack Size/Quantity

Additional examples:





(enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service