跳轉至內容
Merck
全部照片(1)

Key Documents

KW19A3THH1

Millipore

Milligard® 1.2 µm, Opticap® XLT Capsule

inlet connection diam. 5/8 in., Opticap® XLT 30, pore size 1.2 μm, cartridge nominal length 30 in. (75 cm)

同義詞:

Opticap XLT30 Milligard 1.2 μm 5/8 in. HB/HB

登入查看組織和合約定價


About This Item

分類程式碼代碼:
23151806
eCl@ss:
32031610

材料

mixed cellulose esters (MCE)
polyester support
polypropylene
polypropylene housing
polypropylene vent cap
silicone seal

品質等級

法律遵循

meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)

無菌

non-sterile

滅菌相容性

autoclavable compatible

產品線

Opticap® XLT 30

特點

hydrophilic

製造商/商標名

Opticap®

參數

1.0 bar max. inlet pressure (15 psi) at 80 °C
2.75 bar max. inlet pressure (40 psi) at 60 °C
25 °C max. inlet temp.
3.5 bar max. differential pressure (50 psid) at 25 °C
5.5 bar max. inlet pressure (80 psi) at 23 °C
80 psig max. inlet pressure

技術

prefiltration: suitable

長度

87.1 cm (34.3 in.)

柱標稱長度

30 in. (75 cm)

過濾面積

2.5 m2

入口接頭直徑

5/8 in.

入口到出口寬度

19.8 cm (7.8 in.)

出口接頭直徑

5/8 in.

雜質

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
<0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

重量法萃取物

≤165 mg/capsule

基質

Milligard®

孔徑

1.2 μm nominal pore size
1.2 μm pore size

輸入

sample type liquid

接頭

inlet hose barb
outlet hose barb
(16 mm (5?8 in.) Hose Barb Inlet and Outlet)

尋找類似的產品? 前往 產品比較指南

一般說明

Device Configuration: 取样皿滤膜
T-line/Gauge Port: T-line

特點和優勢

Format: Single Layer

包裝

Double Easy-Open bag

其他說明

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Directions for Use

  • Organism Retention: Microorganism
  • Mode of Action: Filtration (size exclusion)
  • Application: BioProcessing
  • Intended Use: Reduction or removal of microorganism/bioburden
  • Instructions for Use: Please refer installation section of OPTICAP® XL Capsules and OPTICAP® XLT Capsules user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

規格

Filter Grade: Standard Milligard® Media

準備報告

Sterilization Method
3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable
This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

分析報告

Gravimetric Extractables: after 24 hours in water at controlled room temperature
Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥15 L

法律資訊

MILLIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany

未找到適合的產品?  

試用我們的產品選擇工具.

儲存類別代碼

4.1B - Flammable solid hazardous materials

水污染物質分類(WGK)

WGK 3


分析證明 (COA)

輸入產品批次/批號來搜索 分析證明 (COA)。在產品’s標籤上找到批次和批號,寫有 ‘Lot’或‘Batch’.。

已經擁有該產品?

您可以在文件庫中找到最近購買的產品相關文件。

存取文件庫

我們的科學家團隊在所有研究領域都有豐富的經驗,包括生命科學、材料科學、化學合成、色譜、分析等.

聯絡技術服務