Drinking Water Testing
Clean water is essential for drinking, as well as for use in food and beverage production. Only 3% of water in the world is fresh, but fresh water sources can contain chemical contaminants, like perfluorooctanoic acid (PFAS) and arsenic, as well as microbiological contaminants, and pathogens. Even after the treatment process, residual chemicals and contaminants in drinking water can exceed safe and legal levels. Municipalities, private water treatment stations, and food and beverage production facilities must regularly test their water supply to ensure chemical and microbiological contaminant levels are kept at or below compliance levels set by regulatory agencies. With a growing global population, the demand for fresh water is predicted to increase by 40% by 20301, With increased demand, maintaining efficiency and accuracy in water testing will provide a constant challenge.
Related Technical Articles
- Spectroquant® Iron Test - a suitable alternative to ICP or AAS for determination of iron in drinking water, mineral water, groundwater, and spring water.
- Nonylphenols (NP) are ubiquitous substances that have been detected in highly diverse foodstuff. As breakdown products of nonylphenol ethoxylates, NP could end up in the aquatic environment. This article presents a rapid method for NP detection in surface water by planar solid phase extraction – planar yeast estrogen screen (pSPE-pYES).
- The Safe Drinking Water Act reflects the primary drinking water regulation. Drinking water here means finished drinking water from the plant and the distribution lines. But the Safe Drinking Water Act covers also the ground water sources for raw water and the surface water sources for Raw Drinking Water.
- Guideline to calculate your working tolerance - Certified Standard Solutions (CRM)
- An easy-to-use, economical, and smartphone-based reliable determination of nitrate in mineral and drinking water with Griess reagent.
- See All (18)
Related Protocols
- Spectrophotometric determination of bromine with dipropyl-p-phenylenediamine (DPD) in drinking water, swimming-pool water, wastewater, and disinfection solutions in a range of 0.020 – 10.00 mg/L.
- Spectrophotometric determination of iodine with dipropyl-p-phenylenediamine (DPD) in drinking water, wastewater, and disinfection solutions in a range of 0.050 – 10.00 mg/L.
- A comprehensive sample preparation and analytical procedure was developed by Supelco for determining BPA in drinking water.
- High performance, reliability, and reproducibility of HS-SPME in combination with GC/MS for the determination of VOCs in water was proven in an interlaboratory trial. The new ISO 17943 using HS-SPME is an improvement on existing official methods for this determination in terms of sensitivity and selectivity.
- The primary column is used to determine presence of the target analytes in the sample; the secondary column of a different selectivity confirms whether a positive match.
- See All (10)
Find More Articles and Protocols
Chemical analysis in drinking water testing
Any industry that produces, uses, or processes drinking water must comply with national regulations and perform regular tests to ensure that drinking water is free of chemical and microbiological contaminations. Common chemical contaminants include aluminum, ammonium, bromate, iron, manganese, chloride, nitrate, nitrite, sulfate, chromium, and other metals.
Additional testing is performed when certain industrial environmental pollutants may be present. Volatile organic compounds (VOCs) are often used during manufacturing, including the production of petroleum products, adhesives, pharmaceuticals, paints, or refrigerants. VOCs are also used as gasoline additives, solvents, hydraulic fluids, and dry cleaning agents. VOC contamination is a human-health concern because many are toxic and are known or suspected human carcinogens.
Microbiological analysis in drinking water testing
Fresh water supplies can also be a source of pathogens, leading to the spread and transmission of diseases without microbiological control. Testing the water supply for every pathogens is expensive and time consuming, so indicator organisms are used as assays to detect fecal and other contaminations. Coliforms, Escherichia coli, and Klebsiella pneumoniae are typically used for testing for fecal contamination.
Microbiological testing of commercial beverages and water products is essential to ensure that they are safe to drink, but also to prevent spoilage. Bacteria, yeasts, molds, and pathogens that occur in raw materials or during the production process can decrease the quality and safety of finished products. Both municipal and commercial water supplies are frequently tested to meet regulatory requirements.
Residual disinfectant testing in drinking water
Disinfection of drinking water reduces the risk of pathogenic infections, but the process can leave behind residues and disinfection byproducts (DBPs) that can pose risk to human health. Additionally, organic and inorganic pollutants may be naturally present in our water supply at its source. The identification of pollutants and DBPs is essential to ensure safe consumption.
Drinking water testing methods
Since contaminated water is harmful to humans and the environment, regulatory agencies, like the U.S. Environmental Protection Agency (USEPA), require the use of official standardized methods (e.g., ISO, EPA, AOAC) for testing drinking water and wastewater. These techniques include quantitative testing, chromatography, spectrophotometry, reflectometry, physical parameter measurements (e.g., cloud point, color, hardness, pH, odor), and pathogen testing (molecular or cell culture-based). These quality control tests are done both at the input source, after in-process filtration steps like flocculation and clarification, and also at post-filtration outputs, including tap sampling.
References
To continue reading please sign in or create an account.
Don't Have An Account?