LA1HCG6S2

Millistak+^® Lenticular Disc Filter

A1HC, cellulose, filtration area 1.8 m², hydrophilic

• Synonim(y): Millistak+ Lenticular Disc Filters, A1HC media series, 16 in. diameter, 8-cell, silicone seal, 2/pack
• Kod UNSPSC: 23151806
• eCl@ss: 32031690

Właściwości

• Materiały: cellulose ; filter aid (inorganic); mixed cellulose esters (MCE) ; polypropylene ; silicone seal
• Poziom jakości: 400
• opis: Post-TFF (Prostak^™) clarification fluids
• Właściwości: hydrophilic
• producent / nazwa handlowa: Millistak+^®
• Parametry: 0.03 bar max. differential pressure (0.5 psid) (Reverse); 0.2 bar max. inlet pressure (3 psi) at 123 °C; 0.21 bar max. differential pressure (3 psid) at 123 °C (Forward); 1 bar max. inlet pressure (15 psi) at 80 °C; 1.03 bar max. differential pressure (15 psid) at 80 °C (Forward); 2.07 bar max. differential pressure (30 psid) at 25 °C (Forward); 2.1 bar max. inlet pressure (30 psi) at 25 °C
• Średnica: 40.64 cm (16 in.)
• powierzchnia filtracyjna: 1.8 m²
• zanieczyszczenia: <0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• non-volatile residue (NVR): 1.50-2.02 mg/m² (gravimetric analysis test)
• pozostałości ogólnego węgla organicznego (TOC): 416-593 ppb (gravimetric analysis test); 565-1037 ppb
• moc wejściowa: sample type liquid
• przewodność: 5-7 μmho per cm at 25 °C (product water)
• stopień filtra: A1HC

Opis

Opis ogólny

Device Configuration: Stack Disk

Stack Design: 16 in. diameter, 8-cell

Zastosowanie

Post-TFF (Prostak^™) clarification fluids

Charakterystyka techniczna

Filter Grade: A1HC

Uwaga dotycząca przygotowania

Sanitization Protocol
May be hot water sanitized for 20 cycles using purified water @ 80 °C for 30 minutes

Sterilization Method
May be steam sterilized for 3 steam-in-place (SIP) cycles of 30 minutes @ 123 °C

Komentarz do analizy

Gravimetric Extractables: Post autoclave (1 cycle of 30 minutes at 123 °C) and pure water flush of 100 L/m² (10 L/ft²) of media surface area

Product Water Conductivity at 25°C: after a pure water flush of 10 L/ft² (100 L/m²) of media surface area per autoclaved (1 cycle of 30 minutes at 123 °C) 12" 16-stack device

The effluent of an autoclaved (1 cycle of 30 minutes @ 123 °C) stacked device is negative after a WFI flush of 10 liters per ft² (100 L/m²) of media surface area

Total Organic Carbon (TOC) Residue: post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft² (100 L/m²) of media surface area

Informacje prawne

MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

Prostak is a trademark of Merck KGaA, Darmstadt, Germany

This page may contain text that has been machine translated.

Informacja o środkach bezpieczeństwa

• Piktogramy: GHS08
• Hasło ostrzegawcze: Danger
• Zwroty wskazujące rodzaj zagrożenia: H372
• Zwroty wskazujące środki ostrożności: P260 - P264 - P270 - P314 - P501
• Klasyfikacja zagrożeń: STOT RE 1 Inhalation
• Organy docelowe: Lungs
• Kod klasy składowania: 6.1C - Combustible acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
• Klasa zagrożenia wodnego (WGK): WGK 3