Skip to Content
Merck
  • Influences of perfluorooctanoic acid on the aggregation of multi-walled carbon nanotubes.

Influences of perfluorooctanoic acid on the aggregation of multi-walled carbon nanotubes.

Journal of environmental sciences (China) (2013-08-08)
Chengliang Li, Andreas Schäffer, Harry Vereecken, Marc Heggen, Rong Ji, Erwin Klumpp
ABSTRACT

The aggregation of multi-walled carbon nanotubes (MWCNTs) in the aqueous phase not only inhibits their extensive utilization in various aspects but also dominates their environmental fate and transport. The role of surfactants at low concentration in the aggregation of MWCNTs has been studied, however the effect of perfluorinated surfactants at low concentration is uncertain. To understand this interfacial phenomenon, the influences of perfluorooctanoic acid (PFOA), and sodium dodecyl sulfate (SDS) as a control, on MWCNT aggregation in the aqueous phase were examined by the UV absorbency method. Influences of pH and cationic species on the critical coagulation concentration (CCC) value were evaluated. The CCC values were dependent on the concentration of PFOA, however a pronounced effect of SDS concentration on the CCC values was not observed. The CCC values of the MWCNTs were 51.6 mmol/L in NaCl and 0.28 mmol/L in CaCl2 solutions, which suggested pronounced differences in the effects of Na+ and Ca2+ ions on the aggregation of the MWCNTs. The presence of both PFOA and SDS significantly decreased the CCC values of the MWCNTs in NaCl solution. The aggregation of the MWCNTs took place under acidic conditions and was not notably altered under neutral and alkaline conditions due to the electrostatic repulsion of deprotonated functional groups on the surface of the MWCNTs.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium chloride, BioUltra, for molecular biology, ≥99.5% (AT)
Sigma-Aldrich
Sodium dodecyl sulfate, ≥98.0% (GC)
Sigma-Aldrich
Sodium chloride, tested according to Ph. Eur.
Supelco
Calcium standard for AAS, analytical standard, 1.000 g/L Ca+2 in hydrochloric acid, traceable to BAM
Sigma-Aldrich
Sodium dodecyl sulfate, ≥99.0% (GC), dust-free pellets
Sigma-Aldrich
Sodium chloride solution, 0.85%
Sigma-Aldrich
Sodium chloride, AnhydroBeads, −10 mesh, 99.999% trace metals basis
Sigma-Aldrich
Sodium chloride, 99.999% trace metals basis
Sigma-Aldrich
Perfluorooctanoic acid, 95%
Sigma-Aldrich
Sodium dodecyl sulfate, ACS reagent, ≥99.0%
Sigma-Aldrich
Sodium chloride, random crystals, optical grade, 99.9% trace metals basis
Sigma-Aldrich
Sodium dodecyl sulfate, tested according to NF, mixture of sodium alkyl sulfates consisting mainly of sodium dodecyl sulfate
Sigma-Aldrich
Calcium chloride dihydrate, BioUltra, for molecular biology, ≥99.5% (KT)
Sigma-Aldrich
Calcium chloride solution, BioUltra, for molecular biology, ~1 M in H2O
Sigma-Aldrich
Calcium chloride dihydrate, tested according to Ph. Eur.
Sigma-Aldrich
Calcium chloride dihydrate, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0%
Supelco
Calcium ion solution for ISE, 0.1 M Ca, analytical standard (for ion-selective electrodes)
Sigma-Aldrich
Calcium chloride
Sigma-Aldrich
Calcium chloride dihydrate, BioXtra, ≥99.0%
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, for molecular biology, suitable for cell culture
Sigma-Aldrich
Sodium chloride solution, BioUltra, for molecular biology, ~5 M in H2O
Supelco
Sodium chloride, reference material for titrimetry, certified by BAM, >99.5%
Supelco
Sodium dodecyl sulfate, suitable for ion pair chromatography, LiChropur, ≥99.0%
Sigma-Aldrich
Sodium chloride solution, 5 M
Sigma-Aldrich
Calcium chloride dihydrate, for molecular biology, ≥99.0%