콘텐츠로 건너뛰기
Merck
모든 사진(1)

Key Documents

추가 자료

CN1HM4E06

Millipore

Polygard® CN Cartridge Filter

pore size 10.0 μm, cartridge nominal length 4 in. (10 cm), Code M (2-118; O-rings)

동의어(들):

Polygard-CN Cartridge Filter 4 in. 10.0 µm Code M Ethylene-Propylene

로그인조직 및 계약 가격 보기
모든 사진(1)

About This Item

UNSPSC 코드:
23151806
eCl@ss:
32031690

material

EPR seal
polypropylene

Quality Level

400

특징

hydrophilic

제조업체/상표

Polygard

파라미터

4.8 bar max. differential pressure (70 psid) at 25 °C
4.8 bar max. inlet pressure (70 psi) at 25 °C

카트리지 공칭 길이

4 in. (10 cm)

직경

7.0 cm (2.75 in.)

여과 면적

0.18 m2

불순물

≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)

공극 크기

10.0 μm nominal pore size
10.0 μm pore size

입력

sample type liquid

카트리지 코드

Code M (2-118; O-rings)

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

The Polygard® CN Cartridge Filter products are nominally rated filters designed for particle removal applications in liquids and gases. The pleated structure of Polygard®-CN filter media minimizes pressure differentials during the filtration process, a 10.0 μm pore size and the all-polypropylene construction of these filters conveys low levels of extractables and broad chemical compatibility. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Polygard-CN cartridge filters provide high throughput with 4.8 bar max. differential pressure (70 psid) at 25 °C Cartridges are robust, strong, resilient and are designed to withstand multiple steam-in-place cycles.

Typical Applications
Polygard-CN cartridge filters are widely used in the beverage industry for liquid and gas filtration applications, for fining operations and bioburden reduction.

Regulatory Compliance
Polygard® CN Cartridge Filters are designed, developed, and manufactured in accordance with a Quality Management System approved by an accredited registering body to an ISO 9000 Quality Systems Standard and are shipped with a Certificate of Quality. Each cartridge filter is supported by a Validation Guide for compliance with regulatory requirements.

For traceability and easy identification, each cartridge filter is marked with identifying characteristics.

Multiple Formats Available
A full range of Polygard® CN Cartridge Filter sizes is available to suit your application requirements. A variety of connection options are offered for easy adaptation to existing housings.

제조 메모

Sanitization Protocol
30 min with hot water @ 80 °C
Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

분석 메모

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥20 L

기타 정보

Directions for Use

  • Organism Retention: Microorganism reduction
  • Mode of Action: Filtration (nominal)
  • Application: BioProcessing
  • Intended Use: Efficient particle and microorganism reduction
  • Instructions for Use: Please refer to the Polygard® and CLARIGARD® Cartridges user guide
  • Storage Statement: Store in dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

법적 정보

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.