VVLP00010

Filtri a membrana in PVDF, pori da 0,1 μm

Durapore^®, 1 roll x 10 ft, hydrophilic

• Sinonimo/i: Durapore^® Membrane Filter, 0.1 µm
• Codice UNSPSC: 40161507
• eCl@ss: 32031602

Proprietà

• Materiali: PVDF ; plain filter; white filter
• Livello qualitativo: 400
• Sterilità: non-sterile
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Durapore^®; Millipore
• Parametri: >0.33 mL/min-cm² water flow rate; 0.15 L/min-cm² air flow rate; 85 °C max. temp.
• Lungh. × largh. filtro: 30 cm × 3 m , roll
• Spessore: 125 μm
• Estraibili (gravimetria): 0.5%
• Indice di rifrazione: n/D 1.42
• Matrice: Durapore^®
• Dimensione pori: 0.1 μm pore size; 70 % porosity
• Punto di bolla: ≥5.0 bar, air with water at 23 °C

Descrizione

Descrizione generale

Filter Type: Screen filter

Applicazioni

Mycoplasma reduction in biological solutions

Altre note

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: General laboratory filtration
• Intended Use: Retention or removal of biological contaminants
• Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Note legali

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Informazioni sulla sicurezza

• Codice della classe di stoccaggio: 10-13 - German Storage Class 10 to 13