Passa al contenuto
Merck
Tutte le immagini(1)

Documenti

545007

Sigma-Aldrich

Tantalum

Sinonimo/i:

Ta

Autenticatiper visualizzare i prezzi riservati alla tua organizzazione & contrattuali
Tutte le immagini(1)

About This Item

Formula empirica (notazione di Hill):
Ta
Numero CAS:
7440-25-7
Peso molecolare:
180.95
Numero MDL:
MFCD00011252
Codice UNSPSC:
12141741
ID PubChem:
24878801
NACRES:
NA.23

Tensione di vapore

<0.01 mmHg ( 537.2 °C)

Temp. autoaccensione

572 °F

Resistività

13.5 μΩ-cm, 20°C

P. eboll.

5425 °C (lit.)

Punto di fusione

2996 °C (lit.)

Densità

16.69 g/cm3 (lit.)

Stringa SMILE

[Ta]

InChI

1S/Ta
GUVRBAGPIYLISA-UHFFFAOYSA-N

Applicazioni

Tantalum powder, a semiconducting material, is used as a photocatalyst and shows high efficiency in the solar splitting of water. Its biocompatibility makes it useful in the development of medical devices and implants.

Pittogrammi

Flame
GHS02

Avvertenze

Danger

Indicazioni di pericolo

H228

Classi di pericolo

Flam. Sol. 1

Codice della classe di stoccaggio

4.1B - Flammable solid hazardous materials

Classe di pericolosità dell'acqua (WGK)

nwg

Punto d’infiammabilità (°F)

Not applicable

Punto d’infiammabilità (°C)

Not applicable

Certificati d'analisi (COA)

Cerca il Certificati d'analisi (COA) digitando il numero di lotto/batch corrispondente. I numeri di lotto o di batch sono stampati sull'etichetta dei prodotti dopo la parola ‘Lotto’ o ‘Batch’.

Possiedi già questo prodotto?

I documenti relativi ai prodotti acquistati recentemente sono disponibili nell’Archivio dei documenti.

Visita l’Archivio dei documenti

I clienti hanno visto anche

Slide 1 of 7

1 of 7

Tantalum foil, thickness 0.05&#160;mm, &#8805;99.9% trace metals basis

Sigma-Aldrich

357243

Tantalum

Ossido di tantalio V &#8722;60&#160;mesh, 99.5%

Sigma-Aldrich

697222

Ossido di tantalio V

Ossido di tantalio V 99% trace metals basis

Sigma-Aldrich

303518

Ossido di tantalio V

Iridium powder, 99.9% trace metals basis

Sigma-Aldrich

209686

Iridium

Vanadium powder, &#8722;325&#160;mesh, 99.5% trace metals basis

Sigma-Aldrich

262935

Vanadium

Tantalum(V) chloride anhydrous, powder, 99.999% trace metals basis

Sigma-Aldrich

510688

Tantalum(V) chloride

Tantalum foil, thickness 0.025&#160;mm, &#8805;99.9% trace metals basis

Sigma-Aldrich

262919

Tantalum

Tantalum-based semiconductors for solar water splitting
Zhang P, et al.
Chemical Society Reviews, 43(13), 4395-4422 (2014)
Hany A El-Sayed et al.
Nanoscale, 5(4), 1494-1498 (2013-01-23)
Ta oxide nanotubes (NTs) were formed by the anodization of Ta at 15 V in a solution of concentrated sulfuric acid containing 0.8-1.0 M hydrofluoric acid. To study the initial stages of NT formation, FESEM images of samples anodized for
Orbital ultrasound in the selective screening of a dural-cavernous sinus fistula.
Hamid Shokoohi et al.
European journal of emergency medicine : official journal of the European Society for Emergency Medicine, 20(2), 137-139 (2013-02-26)
S Nag et al.
Journal of the mechanical behavior of biomedical materials, 16, 21-28 (2012-11-10)
Microstructure and mechanical properties of laser deposited complex quaternary Ti-34Nb-7Zr-7Ta (all wt%), an orthopedic load-bearing implant alloy, has been investigated in detail in both as-deposited as well as heat-treated (β-solutionized and quenched) conditions. The difference in stress-strain behavior of this
Thomas Larzon et al.
Vascular, 21(2), 87-91 (2013-03-20)
Control of back bleeding from the hypogastric artery into the aneurysm after endovascular aneurysm repair (EVAR) of a ruptured aorto-iliac aneurysm may be necessary in order to avoid a type II endoleak. It is an emergency situation and selective catheterization
Visualizza tutti i documenti correlati

Articoli

Self-Propagating Reactions Induced by Mechanical Alloying

An article concerning self-propagating reactions induced by mechanical alloying, presented by Sigma-Aldrich.com.

Biomedical Implant Devices Fabricated from Low Young’s Modulus Titanium Alloys Demonstrating High Mechanical Biocompatibility

Biomedical implants are essentially foreign substances within the human body that must survive many years’ exposure to demanding mechanical and physiological conditions. Despite these challenges, metal implants have been widely used to substitute for or rebuild hard tissues such as bones and teeth.

Il team dei nostri ricercatori vanta grande esperienza in tutte le aree della ricerca quali Life Science, scienza dei materiali, sintesi chimica, cromatografia, discipline analitiche, ecc..

Contatta l'Assistenza Tecnica.