Skip to Content
Merck
  • Novel oral phosphate binder with nanocrystalline maghemite-phosphate binding capacity and pH effect.

Novel oral phosphate binder with nanocrystalline maghemite-phosphate binding capacity and pH effect.

International journal of pharmaceutics (2014-12-03)
T M-H Nguyen, R H Müller, M Taupitz, J Schnorr, B Hamm, S Wagner
ABSTRACT

Hyperphosphatemia is one of the main risk factors contributing to morbidity and mortality in patients with end stage renal disease. The demand for a new phosphate binder is continuously increasing since the number of patients suffering under hyperphosphatemia is growing. However, side effects and high pill burden of currently available phosphate binders are the main reasons for low compliance and uncontrolled serum phosphate levels. Therefore, the aim of this study was to develop a novel phosphate binder with a high phosphate binding capacity over the entire gastrointestinal (GI) pH range. This novel phosphate binder C-PAM-10 is based on d-mannose coated nanocrystalline maghemite and belongs to the new class of phosphate binders, called the "iron based agents". It was possible to obtain a phosphate binding product that showed very high phosphate binding capacities with the characteristic of being pH independent at relevant pH ranges. The simulation of a GI passage ranging from pH 1.2 to pH 7.5 showed a 2.5 times higher phosphate binding capacity compared to the commonly used phosphate binder sevelamer carbonate. The simulation of a pH sensitive coating that releases the iron based phosphate binder at pH values ≥4.5 still showed a very high phosphate binding capacity combined with very low iron release which might decrease iron related side effects in vivo. Therefore, C-PAM-10 and its variations may be very promising candidates as a superior phosphate binder.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydrogen peroxide solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
L-Ascorbic acid, reagent grade, crystalline
Sigma-Aldrich
Acetic acid, for luminescence, BioUltra, ≥99.5% (GC)
Supelco
Acetic acid, analytical standard
Sigma-Aldrich
Hydrogen peroxide solution, tested according to Ph. Eur.
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, for molecular biology, 10 M in H2O
Sigma-Aldrich
Hydrogen peroxide solution, 34.5-36.5%
Supelco
Hydrogen peroxide solution, for inorganic trace analysis, for trace analysis, ≥30%
Supelco
Sulfuric acid, for the determination of nitrogen, for inorganic trace analysis, ≥97.0%
Sigma-Aldrich
Sulfuric acid, 99.999%
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Potassium antimony(III) tartrate hydrate, 99.95% trace metals basis
Sigma-Aldrich
Acetic acid, natural, ≥99.5%, FG
Sigma-Aldrich
Hydrogen peroxide solution, contains potassium stannate as inhibitor, 30-32 wt. % in water, semiconductor grade, 99.999% trace metals basis
Sigma-Aldrich
Acetic acid-12C2, 99.9 atom % 12C
Sigma-Aldrich
Sodium phosphate monobasic-16O4, 99.9 atom % 16O
Supelco
L-Ascorbic acid, analytical standard
Sigma-Aldrich
L-Ascorbic acid, FCC, FG
Sigma-Aldrich
Acetic acid, ≥99.5%, FCC, FG
Supelco
L-Ascorbic acid, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Supelco
Hydrogen peroxide solution, 30 % (w/w), for inorganic trace analysis, for ultratrace analysis
Sigma-Aldrich
Sodium hydroxide, AR, pellets, ≥98.5%
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Acetic acid, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
Sulfuric acid, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Hydrogen peroxide solution, purum p.a., ≥35% (RT)
Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 30 wt. % in H2O, meets USP testing specifications