Saltar al contenido
Merck

Variations in pH sensitivity, acid stability, and fusogenicity of three influenza virus H3 subtypes.

Journal of virology (2014-10-17)
Deirdre A Costello, Gary R Whittaker, Susan Daniel
RESUMEN

Influenza A virus strains adapt to achieve successful entry into host species. Entry is mediated by the viral membrane protein hemagglutinin (HA), which triggers membrane fusion and genome release under acidic conditions in the endosome. In addition to changes in the receptor binding domain, the acid stability of HA has been linked to the successful transmission of virus between avian and human hosts. However, to fully understand the connection between changes in HA and host tropism, additional factors relevant to HA structure-function and membrane fusion are also likely to be important. Using single-particle-tracking (SPT) techniques, individual membrane fusion events can be observed under specific conditions, which provide detailed information regarding HA pH sensitivity and acid stability and the rate and extent of membrane fusion. This provides a comparative way to characterize and distinguish influenza virus fusion properties among virus strains. We used SPT to quantify the fusion properties of three H3 influenza strains: A/Aichi/68/H3N2 (X:31), A/Udorn/72/H3N2 (Udorn), and A/Brisbane/07/H3N2 (Brisbane). The rate of fusion for the most clinically relevant strain, Brisbane, is generally insensitive to decreasing pH, while the fusion of the egg-adapted strains Udorn and X:31 is strongly dependent on pH (and is faster) as the pH decreases. All strains exhibit similar acid stability (the length of time that they remain fusogenic in an acidic environment) at higher pHs, but the egg-adapted strains become less acid stable at lower pHs. Thus, it appears that the laboratory-adapted H3 strains tested may have evolved to compensate for the faster HA deactivation at low pH, with a commensurate increase in the rate of fusion and number of proteins facilitating fusion, relative to the Brisbane strain. The ability of influenza virus to release its genome under different acidic conditions has recently been linked to the transmission of influenza virus between different species. However, it is yet to be determined how acid-induced membrane fusion varies with virus strain and influences tropism. The results presented here are the results of an intra-H3-subtype study of acid stability and fusion kinetics. Using a single-particle-tracking (SPT) technique, we show here that the highest pH that initiates fusion is not necessarily the pH at which the kinetics of fusion is fastest and most abundant for a given strain. Strains exhibit different fusion behaviors, as evidenced by their unique kinetic trends; pH sensitivities, as evidenced by the differences when the first fusion events commence; and HA stabilities, as evidenced by the length of time that virions can persist in an acidic environment and still be fusion competent.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Ácido sulfúrico, ACS reagent, 95.0-98.0%
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 30 wt. % in H2O, ACS reagent
Sigma-Aldrich
Cloroformo, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Peróxido de hidrógeno solution, 30 % (w/w) in H2O, contains stabilizer
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains amylenes as stabilizer
Sigma-Aldrich
Cloroformo, suitable for HPLC, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Cloroformo, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
DAPI, for nucleic acid staining
Sigma-Aldrich
Cloruro de sodio, for molecular biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sigma-Aldrich
Peróxido de hidrógeno solution, 50 wt. % in H2O, stabilized
Sigma-Aldrich
Ácido sulfúrico, 99.999%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Sodium chloride solution, 5 M in H2O, BioReagent, for molecular biology, suitable for cell culture
Sigma-Aldrich
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Cloruro de sodio, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Metanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Cloroformo, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cloroformo, ReagentPlus®, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
SAFC
Sodium chloride solution, 5 M
Sigma-Aldrich
Triethylamine, BioUltra, ≥99.5% (GC)
Sigma-Aldrich
Metanol, Absolute - Acetone free
Sigma-Aldrich
Metanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Metanol, BioReagent, ≥99.93%
Sigma-Aldrich
Cloroformo, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Sodium chloride solution, BioUltra, for molecular biology, ~5 M in H2O
Sigma-Aldrich
Peróxido de hidrógeno solution, contains inhibitor, 35 wt. % in H2O