Saltar al contenido
Merck

Adsorption of p-cresol on novel diatomite/carbon composites.

Journal of hazardous materials (2011-02-23)
H Hadjar, B Hamdi, C O Ania
RESUMEN

Hybrid inorganic/organic adsorbents were synthesized using mixtures of diatomite and carbon charcoal as precursors, and explored for the removal of p-cresol from aqueous solution. The carbon/diatomite composites displayed a bimodal and interconnected porous structure which was partially inherited from both precursors. They display moderate surface areas (between 100 and 400 m(2)g(-1)) due to their large inorganic content (between 70 and 90 wt.%), since the diatomite is a non-porous material. Compared to activated carbons with a more developed porosity, p-cresol adsorption on the prepared carbon/diatomite composites was much faster, showing adsorption capacities similar to those of conventional adsorbents over a wide pH range. These results show a good affinity of p-cresol molecules towards the hybrid inorganic/organic composites, and demonstrate the suitability of these novel materials for the removal of aromatic (polar) molecules, despite their dominant inorganic character.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Celite® 545, filter aid, treated with sodium carbonate, flux calcined
Sigma-Aldrich
Filter agent, Celite® 545
Supelco
Celatom®, lavado con ácido, for use in Total Dietary Fiber Assay, TDF-100A
Sigma-Aldrich
Hyflo® Super Cel®, filter aid, flux calcined, treated with sodium carbonate
Sigma-Aldrich
Diatomaceous earth
Sigma-Aldrich
Celite® 545 AW, filter aid, acid washed, treated with sodium carbonate, flux calcined
Sigma-Aldrich
Celpure® P1000, meets USP/NF testing specifications
Supelco
Celite® Filter Aid, reagent grade
Sigma-Aldrich
Celite® 503, filter aid, treated with sodium carbonate, calcined