Saltar al contenido
Merck
Todas las fotos(2)

Key Documents

MC0SP03FS1

Millipore

Filtro de profundidad Millistak+® HC Pro Pod

C0SP, filtration area 0.33 m2, hydrophilic

Sinónimos:

Millistak+ HC Pro Pod Depth Filter, C0SP media series, 0.33 m 2 surface area

Iniciar sesiónpara Ver la Fijación de precios por contrato y de la organización


About This Item

Código UNSPSC:
23151806
eCl@ss:
32031690

Materiales

acrylic
polypropylene
silica filter aid

Nivel de calidad

descripción

Primary clarification directly out of the bioreactor

Línea del producto

EMPROVE® Filter

Características

hydrophilic

fabricante / nombre comercial

Millistak+®

Parámetros

30 psid max. differential pressure (2.1 bar) at 25 °C (Reverse)
30 psid max. differential pressure (2.1 bar) at 80 °C (Forward)
50 psid max. inlet pressure (3.5 bar) at 80 °C

Altura

12.5 in. (32 cm)
317 mm

Longitud

24.2 in. (62 cm)

depth

3.2 in. (8.1 cm)

filtración área

0.33 m2

impurezas

<0.25 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)

entrada

sample type liquid

conductividad

18.9-41.5 μS/cm at 25 °C (product water)

grado de filtro

C0SP

Descripción general

The Millistak+® HC Pro Pod Depth Filter (high capacity synthetic media) is a synthetic depth filter providing a cleaner and more consistent depth filtration media over current diatomaceous earth (DE) and cellulose (CE) based filter offerings. This unit, featured in a Process Scale Pod format with a C0SP media grade, supports primary and secondary clarification as well as downstream filtration applications.

Aplicación

Primary clarification directly out of the bioreactor

Características y beneficios

Synthetic materials of construction

  • Reduce TOC extractables and pre-use flush volume requirements by 50%
  • No beta glucans to interfere with limulous amoebocyte lysate (LAL) testing for bacterial endotoxins
  • Lot to lot consistency for successful development and implementation of robust clarification processes


Depth filter media formulation & design
  • Provide as much as two times the filtration capacity with equivalent filter retention properties over commercial DE-based benchmarks
  • Improved HCP impurity clearance


Disposable Pod device
  • Flexible, modular format offers scalability from 5 to 12,000 liters or more
  • Robust device format; easy to use and set up

Especificaciones

Filter Grade: C0SP
Trace metals were measured post pure water flush of 50 L/m2 of surface area and 24-hour static soak in pure water. Values based on average of metals extractibles data from three separate uPod device lots. The analysis was made by ICP-MS. The devices were not autoclaved.

Nota de preparación

Sterilization Method
Integrity is maintained after 1 autoclave cycle of 60 min @ 123 ºC. Filtration performance may be impacted post autoclave. Recommended for post use decontamination only.

Nota de análisis

Product Water Conductivity at 25°C: after a pure water flush 50 L/m2 (5 liter per ft2) of media surface area (300 LMH, 10 min). At the end of the flush, a sample was pulled for conductivity measurement. Devices were not autoclaved.

Información legal

Emprove is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany

¿No encuentra el producto adecuado?  

Pruebe nuestro Herramienta de selección de productos.


Certificados de análisis (COA)

Busque Certificados de análisis (COA) introduciendo el número de lote del producto. Los números de lote se encuentran en la etiqueta del producto después de las palabras «Lot» o «Batch»

¿Ya tiene este producto?

Encuentre la documentación para los productos que ha comprado recientemente en la Biblioteca de documentos.

Visite la Librería de documentos

Nuestro equipo de científicos tiene experiencia en todas las áreas de investigación: Ciencias de la vida, Ciencia de los materiales, Síntesis química, Cromatografía, Analítica y muchas otras.

Póngase en contacto con el Servicio técnico