CP1553S03

Lifegard^™ 1,0 µm nominal, Cartucho

pore size 1.0 μm, cartridge nominal length 30 in. (75 cm), Code 5 (2-222; O-rings and spear)

• Sinónimos: Lifegard^™ Cartridge Filter 30 in. 1.0 μm Code 5
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propiedades

• Materiales: borosilicate glass fiber (BGF) ; polypropylene ; polypropylene support; silicone seal
• Nivel de calidad: 400
• esterilidad: non-sterile
• Compatibilidad de esterilización: autoclavable compatible; steam-in-place compatible
• Línea del producto: Lifegard^™
• Características: hydrophilic
• fabricante / nombre comercial: Lifegard^™
• Parámetros: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• técnicas: prefiltration: suitable
• Longitud: 30 in.
• Anchura: 2.7 in.
• longitud nominal del cartucho: 30 in. (75 cm)
• Diámetro: 7.4 cm (2.9 in.)
• filtración área: 1.38 m²
• impurezas: ≤1.0 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.1 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíbles gravimétricos: ≤750 mg/cartridge
• matriz: Lifegard^™
• tamaño de poro: 1.0 μm nominal pore size; 1.0 μm pore size
• entrada: sample type liquid
• código del cartucho: Code 5 (2-222; O-rings and spear)

Descripción

Descripción general

Device Configuration: Cartridge

Características y beneficios

Format: Single Layer

Envase

Double Easy-Open bag

Otras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificaciones

Filter Grade: AP15

Nota de preparación

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

Nota de análisis

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Información legal

Lifegard is a trademark of Merck KGaA, Darmstadt, Germany