Skip to Content
Merck
  • Accelerated separation of GC-amenable lipid classes in plant oils by countercurrent chromatography in the co-current mode.

Accelerated separation of GC-amenable lipid classes in plant oils by countercurrent chromatography in the co-current mode.

Analytical and bioanalytical chemistry (2015-10-07)
Simon Hammann, Michael Englert, Marco Müller, Walter Vetter
ABSTRACT

Triacylglycerols represent the major part (>90%) in most plant oils and have to be eliminated, when the minor compounds such as phytosterols or tocopherols should be analyzed. Here, we used an all liquid-liquid chromatographic technique, countercurrent chromatography (CCC), to fractionate the minor lipids before gas chromatography (GC) analysis. To cover the wide range of polarity of the minor compounds, we used the co-current mode, in which both mobile and stationary phase are pumped through the system. This allowed to elute substances which partitioned almost exclusively in the stationary phase within 90 min. After testing with standard compounds, the method was applied to the separation of sesame oil and sunflower oil samples. The abundant triacylglycerols could be effectively separated from tocopherols, phytosterols, diacylglycerols, and free fatty acids in the samples, and these compounds could be analyzed (after trimethylsilylation) by GC coupled with mass spectrometry. After the enrichment caused by the CCC fractionation, we were also able to identify the tocopherol derivative α-tocomonoenol, which had not been described in sunflower oil before. Also, separation of sesame oil yielded a mixture of the polar compounds sesamin and sesamolin without further impurities.

MATERIALS
Product Number
Brand
Product Description

Supelco
N,O-Bis(trimethylsilyl)trifluoroacetamide with trimethylchlorosilane, with 1% trimethylchlorosilane, for GC derivatization, LiChropur
Sigma-Aldrich
N,O-Bis(trimethylsilyl)trifluoroacetamide, ≥99%
Sigma-Aldrich
Aluminum oxide, nanowires, diam. × L 2-6 nm × 200-400 nm
Sigma-Aldrich
Aluminum oxide, 99.997% trace metals basis
Sigma-Aldrich
Aluminum oxide, mesoporous, MSU-X (wormhole), average pore size 3.8 nm
Sigma-Aldrich
Aluminum oxide, nanopowder, <50 nm particle size (TEM)
Sigma-Aldrich
Aluminum oxide, activated, basic, Brockmann I
Sigma-Aldrich
Oleic acid, ≥99% (GC)
Sigma-Aldrich
Oleic acid, BioReagent, suitable for cell culture
Sigma-Aldrich
Oleic acid, meets analytical specification of Ph, Eur., 65.0-88.0% (GC)
Sigma-Aldrich
Aluminum oxide, activated, acidic, Brockmann I
Sigma-Aldrich
Aluminum oxide, activated, neutral, Brockmann I
Sigma-Aldrich
Pyridine, biotech. grade, ≥99.9%
Sigma-Aldrich
Aluminum oxide, fused, powder, primarily α-phase, 100-200 mesh
Sigma-Aldrich
Aluminum oxide, fused, powder, primarily α-phase, -325 mesh
Sigma-Aldrich
Aluminum oxide, powder, 99.99% trace metals basis
Sigma-Aldrich
Pyridine, ACS reagent, ≥99.0%
Sigma-Aldrich
Aluminum oxide, Corundum, α-phase, -100 mesh
Sigma-Aldrich
Aluminum oxide, pore size 58 Å, ~150 mesh
Sigma-Aldrich
Aluminum oxide, Type WN-6, Neutral, Activity Grade Super I
Sigma-Aldrich
Aluminum oxide, single crystal substrate, <0001>
Sigma-Aldrich
α,α,α-Trifluorotoluene solution, NMR reference standard, 0.05% in benzene-d6 (99.6 atom % D), NMR tube size 10 mm × 8 in.
Sigma-Aldrich
Aluminum oxide, nanopowder, 13 nm primary particle size (TEM), 99.8% trace metals basis