CP1502S03

Cartucce Lifegard^™ di grado 1,0 µm nominale

pore size 1.0 μm, cartridge nominal length 20 in. (50 cm), Code 0 (2-222; O-rings)

• Sinonimo/i: Lifegard^™ Cartridge Filter 20 in. 1.0 μm Code 0
• Codice UNSPSC: 23151806
• eCl@ss: 32031610

Proprietà

• Materiali: borosilicate glass fiber (BGF) ; polypropylene ; polypropylene support; silicone seal
• Livello qualitativo: 400
• Sterilità: non-sterile
• Compatibilità con la sterilizzazione: autoclavable compatible; steam-in-place compatible
• Nome Commerciale: Lifegard^™
• Caratteristiche: hydrophilic
• Produttore/marchio commerciale: Lifegard^™
• Parametri: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• tecniche: prefiltration: suitable
• Lunghezza: 20 in.
• Larghezza: 2.7 in.
• Lunghezza nominale della cartuccia: 20 in. (50 cm)
• Diametro: 7.4 cm (2.9 in.)
• Superficie filtrante: 0.92 m²
• Impurezze: ≤1.0 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.1 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Estraibili (gravimetria): ≤500 mg/cartridge
• Matrice: Lifegard^™
• Dimensione pori: 1.0 μm nominal pore size; 1.0 μm pore size
• input: sample type liquid
• Codice cartuccia: Code 0 (2-222; O-rings)

Descrizione

Descrizione generale

Device Configuration: Cartridge

Caratteristiche e vantaggi

Format: Single Layer

Confezionamento

Double Easy-Open bag

Altre note

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Specifiche

Filter Grade: AP15

Nota sulla preparazione

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

Risultati analitici

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Note legali

Lifegard is a trademark of Merck KGaA, Darmstadt, Germany