GE18-1130-05
EPS power supply, 3501 XL
H × W × D 95 mm × 250 mm × 315 mm, 1 min to 500 h continuous, AC/DC input 102 - 120 V AC
Se connecterpour consulter vos tarifs contractuels et ceux de votre entreprise/organisme
About This Item
Code UNSPSC :
41105300
Nomenclature NACRES :
NB.22
Produits recommandés
Caractéristiques
wetted part: no
Conditionnement
pkg of 1 ea
Fabricant/nom de marque
Cytiva 18113005
Paramètres
0-0.95 humidity limit
1.06 bar (according to GPR, maximum alltitude of 2000 m)
4 °C min. temp.
40 °C max. temp.
H × l × P
95 mm × 250 mm × 315 mm
Sortie
1-200 W
Catégories apparentées
Description générale
EPS Power Supplies cover the wide range of electrophoresis and blotting applications. Designed for performance, EPS Power Supplies can be relied on for security and reproducibility
All EPS Power Supplies offer Easy-to-read digital display. Timed or continuous runs, with end-of-run alarm, if desired. Automatic parameter limit crossover to prevent overheating and protect experiments and equipment. Automatic recovery after power failure. Membrane keypads for easy programming. Two pairs of power outlets for duplicate parallel runs.
General guidelines for using power supplies: The constant current mode is recommended for blotting to prevent overheating. The constant voltage mode is recommended for other applications, such as nucleic acid submarine and mini-vertical gel electrophoresis. When connecting two electrophoresis units to the same power supply, twice as much current is required at the same voltage. To maintain a constant temperature without using a thermostatic circulator, use the constant power mode.
All EPS Power Supplies offer Easy-to-read digital display. Timed or continuous runs, with end-of-run alarm, if desired. Automatic parameter limit crossover to prevent overheating and protect experiments and equipment. Automatic recovery after power failure. Membrane keypads for easy programming. Two pairs of power outlets for duplicate parallel runs.
General guidelines for using power supplies: The constant current mode is recommended for blotting to prevent overheating. The constant voltage mode is recommended for other applications, such as nucleic acid submarine and mini-vertical gel electrophoresis. When connecting two electrophoresis units to the same power supply, twice as much current is required at the same voltage. To maintain a constant temperature without using a thermostatic circulator, use the constant power mode.
Code de la classe de stockage
13 - Non Combustible Solids
Certificats d'analyse (COA)
Recherchez un Certificats d'analyse (COA) en saisissant le numéro de lot du produit. Les numéros de lot figurent sur l'étiquette du produit après les mots "Lot" ou "Batch".
Déjà en possession de ce produit ?
Retrouvez la documentation relative aux produits que vous avez récemment achetés dans la Bibliothèque de documents.
Notre équipe de scientifiques dispose d'une expérience dans tous les secteurs de la recherche, notamment en sciences de la vie, science des matériaux, synthèse chimique, chromatographie, analyse et dans de nombreux autres domaines..
Contacter notre Service technique