MTGR75000

Filtre capsule Aervent^® 50

pore size 0.2 μm

• Synonyme(s) : EPA Est. 041237-FRA-001
• Code UNSPSC : 23151806
• eCl@ss : 32031690
• Nomenclature NACRES : NB.24

Propriétés

• Matériaux: PTFE membrane; polypropylene ; polypropylene housing
• Niveau de qualité: 400
• Stérilité: non-sterile
• Mode de stérilisation compatible: gamma compatible
• Gamme de produits: Aervent^®
• Caractéristiques: hydrophobic
• Fabricant/nom de marque: Aervent^®
• Paramètres: 2.1 bar max. differential pressure at 25 °C; 4.1 bar max. inlet pressure (60 psi) at 25 °C
• Technique(s): gas filtration: suitable
• Longueur: 5.7 cm (2.24 in.)
• Largeur: 2.4 in.
• Diamètre: 6.2 cm (2.4 in.)
• Surface de filtration: 19.6 cm²
• Impuretés: ≤0.5 EU/mL (LAL test, Aqueous extraction)
• Extractibles par gravimétrie: ≤1.0 mg
• Matrice: Aervent^®
• Dimension de pores: 0.2 μm pore size
• Point de bulle: ≥1100 mbar (16 psig), nitrogen with 60/40% IPA/water at 23 °C
• Raccords: (3 mm (1/8 in.) NPT Inlet and Outlet)
• Conditions d'expédition: ambient

Description

Description générale

This Aervent^® hydrophobic Capsule filter contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter, with a 0.2 μm pore size and 19.6 cm² filtration area, is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane within MTGR75000 provides high flow rates and throughput, low extractables and particle shedding, and broad chemical compatibility. For traceability and easy identification, each Aervent-50 filter is hot stamped with its catalogue number and lot number. Each Aervent^® Capsule Filter is integrity tested during manufacture.

Application

Typical Applications

• Sterile venting of vessels and carboys
• Autoclave vacuum break lines
• Low volume sterile filtration of non-aqueous fluids
• Small fermenter inlet and exhaust gas filtration

Notes préparatoires

Sterilization Method
10 autoclave cycles of 30 min @ 130 °C; not in-line steam sterilizable

Remarque sur l'analyse

Bacterial Retention
Quantitative retention of 10⁷ CFU/cm²Brevundimonas diminuta (ATCC^® 19146) per ASTM F838-83 methodology

Gravimetric Extractables: in 70/30 % IPA/water

Autres remarques

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informations légales

AERVENT is a registered trademark of Merck KGaA, Darmstadt, Germany

ATCC is a registered trademark of American Type Culture Collection