CCGL73TP1

Charged Durapore^® 0.22 µm, Cartridge

pore size 0.22 μm, cartridge nominal length 30 in. (75 cm), Code 7 (2-226; O-rings w/locking-tabs)

• Synonym(e): Charged Durapore Cartridge 30 in. 0.22 μm Code 7
• UNSPSC-Code: 23151806
• eCl@ss: 32031690

Eigenschaften

• Materialien: PVDF ; polypropylene ; polypropylene support; silicone seal
• Qualitätsniveau: 400
• Sterilität: non-sterile
• Kompatibilität mit Sterilisationsverfahren: autoclavable compatible; steam-in-place compatible
• Produktlinie: Durapore^®
• Leistungsmerkmale: hydrophilic
• Hersteller/Markenname: Durapore^®
• Parameter: ≤30 mL/min air diffusion at 2.1 bar (30 psig) and 23 °C (in water); 0.35 bar max. differential pressure (5 psid) at 135 °C (Forward); 0.35 bar max. inlet pressure (5 psi) at 135 °C (Forward); 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward); 1.7 bar max. inlet pressure (25 psi) at 80 °C (Forward); 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse); 3.5 bar max. inlet pressure (50 psi) at 25 °C (Reverse); 45 L/min flow rate at 400 mbar (ΔP); 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward); 5.5 bar max. inlet pressure (80 psi) at 25 °C (Forward)
• Methode(n): sterile filtration: suitable
• Länge: 30 in.
• Breite: 2.7 in.
• Nennlänge Kartusche: 30 in. (75 cm)
• Durchmesser: 6.9 cm (2.7 in.)
• Filtrationsfläche: 2.07 m²
• Verunreinigungen: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.5 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• Gravimetrisch bestimmte extrahierbare Substanzen: ≤60 mg/cartridge
• Matrix: Charged Durapore^®
• Porengröße: 0.22 μm pore size
• Aufnahme: sample type liquid
• Blasenpunkt: ≥2760 mbar (40 psig), air with water at 23 °C
• Kartuschencode: Code 7 (2-226; O-rings w/locking-tabs)

Beschreibung

Allgemeine Beschreibung

Device Configuration: Filterelement

Verpackung

Leicht zu öffnender Doppelbeutel

Sonstige Hinweise

Diese Produkte werden in einem Werk hergestellt, das den GMP-Richtlinien der FDA entspricht.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore^® Membrane user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Angaben zur Herstellung

Sterilization Method
10 In-situ-Dampfsterilisationszyklen von 30 min bei 135 °C

This product was manufactured with a Durapore^® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Hinweis zur Analyse

Bacterial Retention
Quantitative Rückhaltung von Brevundimonas diminuta bei einer Mindestbeaufschlagung von 1 x 10⁷ KBE/cm² unter Anwendung der ASTM^® F838-Methode.

Erfüllt die Anforderungen des USP-Tests auf oxidierbare Substanzen nach Durchspülen mit ≥500 ml Wasser

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Rechtliche Hinweise

ASTM is a registered trademark of American Society for Testing and Materials

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany