Accéder au contenu
MilliporeSigma

Direct Determination of MCPD Fatty Acid Esters and Glycidyl Fatty Acid Esters in Vegetable Oils by LC-TOFMS.

Journal of the American Oil Chemists' Society (2011-02-26)
Troy D Haines, Kevin J Adlaf, Robert M Pierceall, Inmok Lee, Padmesh Venkitasubramanian, Mark W Collison
RÉSUMÉ

Analysis of MCPD esters and glycidyl esters in vegetable oils using the indirect method proposed by the DGF gave inconsistent results when salting out conditions were varied. Subsequent investigation showed that the method was destroying and reforming MCPD during the analysis. An LC time of flight MS method was developed for direct analysis of both MCPD esters and glycidyl esters in vegetable oils. The results of the LC-TOFMS method were compared with the DGF method. The DGF method consistently gave results that were greater than the LC-TOFMS method. The levels of MCPD esters and glycidyl esters found in a variety of vegetable oils are reported. MCPD monoesters were not found in any oil samples. MCPD diesters were found only in samples containing palm oil, and were not present in all palm oil samples. Glycidyl esters were found in a wide variety of oils. Some processing conditions that influence the concentration of MCPD esters and glycidyl esters are discussed.

MATÉRIAUX
Référence du produit
Marque
Description du produit

Sigma-Aldrich
Acetate de sodium, anhydrous, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Acetate de sodium, ACS reagent, ≥99.0%
Sigma-Aldrich
Acetate de sodium, puriss. p.a., ACS reagent, reag. Ph. Eur., anhydrous
Sigma-Aldrich
Glycidol, 96%
Sigma-Aldrich
Acetate de sodium, 99.995% trace metals basis
Sigma-Aldrich
Acetate de sodium, anhydrous, BioUltra, for luminescence, for molecular biology, ≥99.0% (NT)
Sigma-Aldrich
Acetate de sodium, powder, BioReagent, suitable for electrophoresis, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Acetate de sodium, anhydrous, for molecular biology, ≥99%
Sigma-Aldrich
Acetate de sodium, BioXtra, ≥99.0%
Sigma-Aldrich
Acetate de sodium, meets USP testing specifications, anhydrous