Skip to Content
MilliporeSigma
  • Comparative percutaneous permeation study using caffeine-loaded microemulsion showing low reliability of the frozen/thawed skin models.

Comparative percutaneous permeation study using caffeine-loaded microemulsion showing low reliability of the frozen/thawed skin models.

International journal of pharmaceutics (2014-05-29)
Amnon C Sintov, Igor Greenberg
ABSTRACT

The aim of this study was to explore the transdermal delivery potential of a new caffeine-containing microemulsion system. The skin permeability of caffeine (CAF) was measured in vitro using skin excised from three different animal species: rat, rabbit and pig. As shown, microemulsion containing 20% aqueous phase enhanced CAF permeation across fresh rat skin by one order of magnitude (Papp=8.2×10(-3) vs. 0.86×10(-3) cm/h; enhancement ratio=9.6). The permeability coefficient value, the cumulative permeation amount, and the percent of dose permeated after 24 h, decreased with the increase of water content from 60% to 80% in microemulsions due to the apparent increase in the droplet size. Importantly, differences were noted between caffeine transport rates across fresh and frozen/thawed pig skin whereas microemulsions delivered caffeine at similar rates across rat and rabbit skin, either fresh or frozen/thawed. It has been shown that the permeability of caffeine through frozen/thawed pig skin was abnormally high and was independent of its vehicle properties, i.e., its hydrophilic or lipophilic nature. It has been hypothesized that the reason for this abnormality is that porcine stratum corneum has a higher ceramide-to-cholesterol ratio compared to rat and rabbit skin. This unusual phenomenon observed in a non-freshly used porcine skin places a question mark on its suitability to in vitro evaluation of transdermal drug delivery systems.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Caffeine, Sigma Reference Standard, vial of 250 mg
Sigma-Aldrich
Caffeine, powder, ReagentPlus®
Sigma-Aldrich
Caffeine, meets USP testing specifications, anhydrous
Sigma-Aldrich
Caffeine, BioXtra
Sigma-Aldrich
Isopropyl palmitate, ≥90%
Sigma-Aldrich
Caffeine, anhydrous, 99%, FCC, FG
Supelco
Mettler-Toledo Calibration substance ME 18872, Caffeine, traceable to primary standards (LGC)
Sigma-Aldrich
Caffeine, anhydrous, tested according to Ph. Eur.
Sigma-Aldrich
Isopropyl palmitate, technical grade, 90%
Supelco
Caffeine Melting Point Standard, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Caffeine, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Isopropyl palmitate, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Caffeine, United States Pharmacopeia (USP) Reference Standard
Supelco
Caffeine, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
USP
Caffeine melting point standard, United States Pharmacopeia (USP) Reference Standard
Caffeine, European Pharmacopoeia (EP) Reference Standard
USP
Isopropyl palmitate, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Sodium chloride solution, 0.85%
Supelco
Melting point standard 235-237°C, analytical standard
Sigma-Aldrich
Sodium chloride, BioPerformance Certified, ≥99% (titration), suitable for insect cell culture, suitable for plant cell culture
SAFC
Sodium chloride solution, 5 M
Caffeine for system suitability, European Pharmacopoeia (EP) Reference Standard
Isopropyl hexadecanoate, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Propylene carbonate, ReagentPlus®, 99%
Supelco
Sodium chloride, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Propylene carbonate, suitable for HPLC, 99.7%
Sigma-Aldrich
Sodium chloride, meets analytical specification of Ph. Eur., BP, USP, 99.0-100.5%
Sigma-Aldrich
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Sodium chloride, BioXtra, ≥99.5% (AT)
Sigma-Aldrich
Sodium chloride, tablet