64012BC

MVP ICON^® ATP Calibrator Set

MVP ICON^®, ATP Luminometer Calibration

• Sinônimo(s): ATP Calibrator Set, ATP Measurement Calibration Kit, Quality Control ATP Calibrator
• Código UNSPSC: 41122409
• NACRES: NB.79

Propriedades

• Agency: EP; ISO; USP
• prazo de validade: 5 yr
• Características: ready-to-use
• fabricante/nome comercial: MVP ICON^®
• embalagem: set of calibrator rods
• condição de armazenamento: protect from light (Keep in a tightlyclosed container, away from any light sources)
• aplicação(ões): food and beverages
• compatibilidade: for use with MVP ICON instrument
• temperatura de armazenamento: 15-25°C

Descrição

Descrição geral

MVP ICON^® ATP Calibrator Set consists of two calibration devices (“rods”) that are used for performance verification and calibration of the MVP ICON^® and MVP systems. The luminescent calibrator consists of a 14C radioactive source that emits a very low level (5 x 105 d.p.m., or 0.225 microcuries) of low-energy ß-radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10 % of its original value, at a sufficiently high level to make consistent verification and calibration functions possible over the five‐year life of the calibrator. The non‐luminescent black plastic calibrator provides a reliable low‐end or “dark” source reading.

Aplicação

MVP ICON^® ATP Calibrator Set is used for performance verification and calibration of the MVP ICON^® instrument for rapid monitoring of surface hygiene in the Food and Beverage industries.

Características e benefícios

• On-site calibration
• Satisfies HACCP and GMP requirements
• No need to send the equipment out to a 3rd party.

Componentes

• One luminescent calibrator
• One non-luminescent calibrator

Adequação

ATP Testing, Food Processing, HACCP Monitoring, Sanitation

Princípio

The luminescent calibrator consists of a 14^C radioactive source that emits a very low level (5 x 10⁵ d.p.m., or 0.225 microcuries) of low energy ß radiation in a plastic scintillation matrix. This matrix is configured to give constant light output, within 10% of its original value, at a sufficiently high level to make consistent verification and calibration functions possible over the five- year life of the calibrator. The non-luminescent black plastic calibrator provides a reliable low-end or “dark” source reading.

Método de teste

ATP Bioluminescence

Armazenamento e estabilidade

To ensure the stability and longevity of the luminescent calibrator, the following precautions must be taken:

• Limit Exposure to Light.
• Store the luminescent calibrator in the dark or weak ambient light.
• If the luminescent calibrator is exposed to bright light before use, insert it in the MVP ICON^® or MVP and wait a minimum of 2 minutes before proceeding.
• The kit box provided is recommended as an appropriate dark storage.
• Do not expose to direct sunlight or intense artificial light before use.

Outras notas

Avoid crushing, cutting, or dropping the calibrators.

Informações legais

BioControl is a registered trademark of BioControl Systems, Inc.

MVP ICON is a registered trademark of Merck KGaA, Darmstadt, Germany

Componentes do kit também disponíveis separadamente

• 72001SBC Luminescent Calibrator Rod
• Non Luminescent Calibrator Rod

Informações de segurança

• Código de classe de armazenamento: 10 - Combustible liquids
• Classe de risco de água (WGK): WGK 3
• Ponto de fulgor (°F): Not applicable
• Ponto de fulgor (°C): Not applicable