CP1553S03

Cartucho Lifegard^™ 1,0 µm nominal

pore size 1.0 μm, cartridge nominal length 30 in. (75 cm), Code 5 (2-222; O-rings and spear)

• Sinônimo(s): Lifegard^™ Cartridge Filter 30 in. 1.0 μm Code 5
• Código UNSPSC: 23151806
• eCl@ss: 32031610

Propriedades

• Materiais: borosilicate glass fiber (BGF) ; polypropylene ; polypropylene support; silicone seal
• Nível de qualidade: 400
• esterilidade: non-sterile
• Compatibilidade de esterilização: autoclavable compatible; steam-in-place compatible
• linha de produto: Lifegard^™
• Características: hydrophilic
• fabricante/nome comercial: Lifegard^™
• Parâmetros: 3.5 bar max. differential pressure (50 psid) at 25 °C; 3.5 bar max. inlet pressure (50 psi) at 25 °C
• técnica(s): prefiltration: suitable
• Comprimento: 30 in.
• Largura: 2.7 in.
• comprimento nominal do cartucho: 30 in. (75 cm)
• Diâmetro: 7.4 cm (2.9 in.)
• área de filtração: 1.38 m²
• Impurezas: ≤1.0 EU/mL bacterial endotoxins (LAL test, Aqueous extraction); <0.1 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
• extraíveis gravimétricos: ≤750 mg/cartridge
• matriz: Lifegard^™
• tamanho de poro: 1.0 μm nominal pore size; 1.0 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 5 (2-222; O-rings and spear)

Descrição

Descrição geral

Device Configuration: Cartridge

Características e benefícios

Format: Single Layer

Embalagem

Double Easy-Open bag

Outras notas

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Directions for Use

• Organism Retention: Microorganism
• Mode of Action: Filtration (size exclusion)
• Application: BioProcessing
• Intended Use: Reduction or removal of microorganism/bioburden
• Instructions for Use: Please refer Steam Sterilization & Integrity Testing Procedures guide and first page of Visual Inspection Guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Especificações

Filter Grade: AP15

Nota de preparo

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 121 °C for 30 min

Nota de análise

Gravimetric Extractables: after 24 hours in water at controlled room temperature

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥5 L

Informações legais

Lifegard is a trademark of Merck KGaA, Darmstadt, Germany