CN1H72V06

Filtro de cartucho Polygard^® CN

• Sinônimo(s): Polygard-CN Cartridge Filter 20 in. 10.0 µm Code 7 Fluoroelastomer
• Código UNSPSC: 23151806
• eCl@ss: 32031690

Propriedades

• Materiais: fluoroelastomer seal; polypropylene
• Nível de qualidade: 400
• Características: hydrophilic
• fabricante/nome comercial: Polygard
• Parâmetros: 4.8 bar max. differential pressure (70 psid) at 25 °C; 4.8 bar max. inlet pressure (70 psi) at 25 °C
• comprimento nominal do cartucho: 20 in. (50 cm)
• Diâmetro: 7.0 cm (2.75 in.)
• área de filtração: 0.84 m²
• Impurezas: ≤0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction)
• extraíveis gravimétricos: ≤100 mg
• tamanho de poro: 10.0 μm nominal pore size; 10.0 μm pore size
• entrada: sample type liquid
• código do cartucho: Code 7 (2-226; O-rings w/locking-tabs)

Descrição

Descrição geral

Device Configuration: Cartridge

Nota de preparo

Sanitization Protocol
30 min with hot water @ 80 °C

Sterilization Method
10 autoclave cycles or SIP @ 126 °C for 30 min

Nota de análise

Gravimetric Extractables: after 24-h soak in water

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥10 L

Outras notas

Directions for Use

• Organism Retention: Microorganism reduction
• Mode of Action: Filtration (nominal)
• Application: BioProcessing
• Intended Use: Efficient particle and microorganism reduction
• Instructions for Use: Please refer to the Polygard^® and CLARIGARD^® Cartridges user guide
• Storage Statement: Store in dry location
• Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Informações legais

CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany

POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany