Saltar al contenido
Merck

Exploring the enantioseparation of amino-naphthol analogues by supercritical fluid chromatography.

Journal of chromatography. A (2015-02-18)
Anita Aranyi, István Ilisz, Antal Péter, Ferenc Fülöp, Caroline West
RESUMEN

The direct separation of the enantiomers of 1-(α-aminoarylmethyl)-2-naphthol, 1-(α-aminoalkyl)-2-naphthol, 2-(α-aminoarylmethyl)-1-naphthol analogues and 2-(1-amino-2-methylpropyl)-1-naphthol) was investigated in supercritical fluid chromatography. Five commercially available chiral stationary phases based on immobilized polysaccharide chiral selectors (Chiralpak IA, IB, IC, ID and IE) were evaluated. Chiralpak IB was by far the most efficient to achieve the separation of these racemates and was further selected for optimization of elution conditions. The effects of column temperature (varying between 5 and 45 °C) and co-solvent added to carbon dioxide (methanol, ethanol, isopropanol and dichloromethane) were investigated. A particular attention was paid to mobile-phase additives. Several of them, acids, bases or salts (namely water, formic acid, acetic acid, trifluoroacetic acid, diethylamine, diethanolamine, triethylamine, triethanolamine, dimethylethanolamine, ammonia and ammonium acetate), were tested in order to improve peak shapes while maintaining selectivity. With the help of other achiral naphthol derivatives, the additive effects were examined.

MATERIALES
Referencia del producto
Marca
Descripción del producto

Sigma-Aldrich
Metanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Alcohol etílico puro, 200 proof, for molecular biology
Sigma-Aldrich
2-Propanol, suitable for HPLC, 99.9%
Sigma-Aldrich
Ácido trifluoroacético, ReagentPlus®, 99%
Sigma-Aldrich
Ácido trifluoroacético, suitable for HPLC, ≥99.0%
Sigma-Aldrich
Diclorometano, suitable for HPLC, ≥99.8%, contains amylene as stabilizer
Sigma-Aldrich
Metanol, ACS reagent, ≥99.8%
Sigma-Aldrich
2-Propanol, ACS reagent, ≥99.5%
Sigma-Aldrich
Ácido acético, glacial, ACS reagent, ≥99.7%
Sigma-Aldrich
Diclorometano, contains 40-150 ppm amylene as stabilizer, ACS reagent, ≥99.5%
Sigma-Aldrich
Ácido acético, glacial, ReagentPlus®, ≥99%
Sigma-Aldrich
Metanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Ácido fórmico, reagent grade, ≥95%
Sigma-Aldrich
2-Propanol, for molecular biology, BioReagent, ≥99.5%
Sigma-Aldrich
Metanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Diclorometano, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%, contains 50-150 ppm amylene as stabilizer
Sigma-Aldrich
Ácido fórmico, ACS reagent, ≥96%
Sigma-Aldrich
Ammonium acetate, ACS reagent, ≥97%
Sigma-Aldrich
Diclorometano, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer